JAS Timber

4.5 inch VT&G Cladding V-2.Sides - Redwood size 20x114mm cover | CHOOSE length1.31

21mm VT&G Redwood Cladding - profile
  • 21mm VT&G Redwood Cladding - profile
  • RWM 522 PTGV2S
  • Masons Timber logo - Black/Yellow - JAS Timber
  • Cheshire Mouldings - Green/Brown New Logo - JAS Timber
  • Richard Burbidge - Black / White Dovetail logo - JAS Timber
Product code 1505-5.inch-2S.VT&G-Gate.Board-Reds-Cut.Length
  • £3.20
  • £3.84

V.2S.T&G Redwood Cladding and Gate Boarding -
2SV-Joint Tongue and Groove 114mm cover x 20mm thick
ex 125x25mm Scandinavian Redwood boards - Planed Tongued & Grooved V-2-Sides PTGVJ2S 25x125mm

You can see our range of T&G Floorings and Claddings - Timber - Floorboard - Matchboard - Cladding

Tongue and Groove Redwood Cladding is usually machined from 25mm Fifths Joinery quality Scandinavian Redwood Boards to size 114mm cover x 20mm thickness.

The present stock needs approximately 8.7 linear metres laid, to cover 1 square metre of finished wall or ceiling area; Don't forget you may have some wastage if you want to finish each board on a joist, as is the recommended practise.

5x1 inch Scandinavian V.th Redwood normally has a few knots that generally stay firm - slightly more knots than in an Unassorted quality softwood.

125mm Profiled Redwood Timber is a natural product - variations in knots, colour and grain should be expected - They are not defects.

25mm Planed Joinery Timber is kiln-dried - where the moisture level is brought down to 18-20%. Generally in a heated building, the moisture level can be 8-10%, and it is here, where the moisture level of timber is rapidly changed, that twisting, warping and splitting can occur. What can be done is to leave the floorboard in a room to acclimatise in a stack, to stop the twisting and cupping, and shuffle the boards occasionally so that they dry out slowly and evenly, to help minimise any movement/­twisting and surface checking/­splitting that occurs naturally with changes in moisture content. 5 x 1 Machined Timber should then be treated and fixed in place as soon as possible to help minimise this movement.

Planed 125x25mm Softwood needs suitable external treatment, finishing and maintenance for exterior use; External use of 5 x 1 inch Planed Reds is at your own risk - unless we have had the timber specifically vacuum-treated for you, with a guarantee certificate.

Sizes may be the usual timber nominal size that the 25x125mm Profiled Redwood VJ2S.T&G Moulding is machined from, with a finished size that is generally obtained; V.T&G 5x1 Redwood sizes are generally ±1mm on thickness / ±2mm on width, and with a cross-cutting tolerance, and there may be splitter saw cut-edges; This is the size immediately after machining the 5 inch profile, and does not take into account any movement later, caused by moisture movement into, or out of the 5x1 Planed Wood. The size and profile of softwood cladding may vary from batch to batch, so it is best to purchase all you need for a job in one go, rather than buying more at a later date.

  • JAS Timber cannot be held responsible for any variations in machined 5 x 1 VT&G Reds sizes, pattern, construction, grading, moisture-content, treatment, certification, knots, colour, grain or finish.
  • If it is important, then you need to check these or any other details before purchasing, & notify us in writing on your order.

We can supply FSC or PEFC Certification for 25 x 125mm Profiled Redwood with our Chain of Custody Certificates (CoC) - JAS Timber CoC Certification - for FSC 125mm V.T&G Reds it is INT-COC-003944.150 and for PEFC 125mm V.T&G Reds it is INT-PEFC­/COC-001119.150 - poa;

  • Check your 5" VT&G Reds Delivery on arrival, to see that all its component dimensions, any mouldings, any glazing, and that ALL other details are correct, prior to any related work on site;
  • JAS Timber cannot be held liable for the consequences of any variation;
  • We cannot exchange any Softwood VT&G once work has commenced; Larger orders and ALL Direct Deliveries of 125mm V.T&G Redwood are supplied as a Special Order.

There are no reviews yet.

Write a review

    Overall satisfaction
    Value for money
    Ease of use
1 item
4.5 inch VT&G1S Dummy V-Groove Cladding - Redwood size 112 x 14mm | CHOOSE length

4.5 inch VT&G1S Dummy V-Groove Cladding - Redwood size 112 x 14mm | CHOOSE length

Dummy V-Grooved 1-Side Board 4.5 inch cover Pine Tongue & Groove - 5 length OPTIONS x 0.3m | Price per metre:
  • £2.40 + VAT 20%

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Redwood VT&G Boards.
Van Delivery of Reds 4.5 inch 2S.V Tongue and Groove Cladding in Blackburn, Lancashire and the North-West, from £10.00 +vat
- poa; ( from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat; )

Chargeable carriage weights for Profiled Redwood 2SVT&G Boards may be shown in Kg per metre, or per length - to include the minimum of packaging, our careful packing and Tuffnells Standard Zone-A Carriage Charge; To order online - Click add to Basket, taking care if there are any options to choose in drop-down menus; To see your ongoing Order Total or to amend it, click the small Checkout Trolley icon at the Top-RHS of the page in the Green Navigation-bar.

Tuffnells Carrier Delivery of 4.5" Reds VT&G Gate Board Lengths costs from £12.40 +vat - up to 10Kg and 2.4 metres x 400x400mm, then +50p per extra Kg; For 2.4 to 3 metres from £15 +vat more - poa; Anything longer is not suitable unless in pallet quantities to Zone A Mainland - poa other zones; The risk of damage is roughly 5% with carrier delivery, so we urge you NOT to sign for your consignment until you have checked it; Once signed ( "unchecked" is not valid ) - any carrier will deem that you have received your order in reasonable condition - It is then your responsibility; Please do not accept your delivery if damage is apparent - Refuse it marked "Damaged" so that it is returned to us - thanks. You can choose an "Insured" Tracked Delivery for £6 +vat extra, by adding - TNT Carriage

Haulier Delivery of Timber Reds VT&G Mouldings can be done for larger quantities, charged per 1.2 metre pallet space to your postcode - poa;

Direct Delivery of Profiled 4.5 inch T&G Lengths may be possible from some of our suppliers - poa;

( Please tell us the delivery post-code for your enquiry about Profiled Redwood Gate Boards, so that we can quote for shipping. )

  • The January 2022 Quarterly Scandinavian Softwood Price Lists are current - 01/03/2022
  • The January 2022 Cheshire Mouldings Flooring and Claddings Price List is current - 01/03/2022
  • The October 2021 Richard Burbidge Timber Mouldings Price List is current - 01/03/2022
  • The Masons Timber October 2021 Softwood, Hardwood and Oak Mouldings Price Lists are current - 01/03/2022
  • Please phone us at JAS Timber for any further details about Prepared Vee Tongue and Groove Profiles - 01254 54000

E.&O.E. see T&C - We try to keep prices and specifications of Reds Cladding correct, please tell us if you see any errors.