JAS Timber

Softwood Porch Canopy - Assembled Gallows Bracket 1500x1000mm

Porch Gallows Bracket mtm
Product code 3106-MtM-Porch-Gallows-Bracket
  • £75.00
  • £90.00

Gallows Bracket - for a Timber Porch Canopy - from the JAS Workshop
- Assembled Single Gallows Bracket - 1500x1000mm
- Made from PEFC Certified Scandinavian Softwood/­Redwood.

We can also make Gallows Brackets to other sizes in our Workshop, and have a stock 700x605mm bracket - Standard Size Gallows Bracket.

Also see the full Richard Burbidge Range of Timber Porches, Siderail Kits & Finials - Porch Canopy Range

See the Richard Burbidge Timber Porch Canopy Accessories and Instructions leaflet : Richard Burbidge Timber Porch Canopy Accessories & Fitting Instructions

For more details from Richard Burbidge see : Richard Burbidge Timber Porch Canopies

Timber Porch Canopy Gallows Bracket -

Dimensions - 1500mm x 1000mm = height x projection from wall;
Made from standard 3x3 PSE Fifth Scandinavian Redwood, untreated and "in the white"
ie needing final sanding, treatment and decorative weather-proof coat; see - 3x3 Planed Timber.

The vertical component will be cut to 50mm thickness - so the 1000mm horizontal size is measured from back of this;
If the horizontal component is left at it's full 3x3 Planed size - 69mm x 69mm, the 1500mm vertical size is measured from the top of this;
Or is the horizontal component 50mm thick?
The front edge of the diagonal is set 250mm in from the front edge of the horizontal component -
The bottom edge of the diagonal is set 250mm up from the bottom edge of the vertical component - (2 sizes from your initial phone call / Are they correct?)
This diagonal components will be a straight piece of timber as we think the one is shown in the photo.

Stop-chamfers: width of the chamfer ..mm
Vertical - start distance from Top - ..mm - start distance from Bottom - ..mm - length of the chamfer ..mm
Horizontal - start distance from Front- ..mm - start distance from Back - ..mm - length of the chamfer ..mm

There will be a small ( appro­ximately 1.5mm ) 45º chamfer on all the corners of  the timber to make the components more hardwearing, and able to take a decorative coating more easily. This means that all face joints will have a v-groove.

If any of our assumptions above are incorrect, we need to know now; It will be too late once work has started on the Gallows Bracket.

Manufactured from PEFC or FSC certified timber, but the certificate doesn't apply to a finished manufactured product..

Be sure to apply a preservative to weather-protect the timber and install using the straigh­tforward guide. 
After that, your timber porch canopy can be tiled or slated to match your existing roof, and painted or stained to the finish of your choice.

- We cannot be held responsible for any variations in machined Timber Gallows Bracket component sizes, pattern, grading, moisture content, treatment, certi­fica­tion, knots, colour or grain.
- If it is important, then you need to check these or any other details before commencing work & notify us in writing on your order.

- Check all component dimensions, mouldings, glazing or any other details are correct prior to any work on site;
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot exchange any Pine Joinery Product once work has commenced; A made to size Gallows Bracket is supplied as a Special Order.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Assembled Timber Gallows Brackets.
3_Credit_Cards_logo
Van Delivery of Timber Gallows Brackets on our van, in Blackburn, Lancashire and the North-West, from £10 +vat, + £1 +vat per mile - poa; (  from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;  )

The chargeable carriage weights of JAS Assembled Softwood Gallows Brackets vary with size and packaging;

Carrier Delivery of Timber Gallows Brackets is possible from £12.40 +vat - up to 10Kg and 2.4 metres, then 50p per Kg to Zone A mainland - poa other zones; Damage to Joinery Products is quite likely with carrier, so probably better to order delivery with our van, if it's only slightly dearer. The second best thing is to have the item flat packed - still the same cost, as our joiner still has to fit the item together, but is less easily damaged when all the timber is bundled together. We need to send by TNT to have any hope of getting a claim, so do not sign if you haven't checked the product - It doesn't cut it later with TNT to say the packaging looked ok, when you have signed - "Received in good condition" it is then your respon­sibility!

( Please tell us the delivery post-code for your enquiry about Made to size Timber Gallows Brackets, so that we can quote for shipping. )

- Please phone us at JAS Timber with any enquiries about Made to Measure Assembled and Kit Porch Gallows Brackets - 01254 54000

E. & O.E. see
T&C - We do try to keep prices and specifi­cations of Softwood Assembled Gallows Brackets correct, but mistakes can be made! Please let us us know if you do spot any errors - thanks.