JAS Timber

Ply Paint-Grade unfinished FD60 Glazed VP Fire Door - 54mm Internal Paint-Grade One-Hour Firecheck - Select VP & Options from Menu

Plywood FD60 1VP Fire Door - MtM
  • Plywood FD60 1VP Fire Door - MtM
  • Ply FD30 MtM with 1G Glass-VP Fire Door
  • Ply 1G Glazed VP Fire Door
  • Beech FD30 Glazed VP 20G Fire Door
  • Maple Glazed FD30 Fire Door - 1G VP
  • Koto Glazed FD30 Fire-Door Made to Size - 5G VP
  • Ash FD30 MtM Fire Door - 1 Circular VP - Type 9
  • Ash MtM Fire-Door 5VP Type10
  • Cherry Glazed FD30 Fire Door - DDA 16G VP
  • Koto FD30 Glazed Fire Door - Type 8G VP
Product code 3008P-Ply-Paint-Grade-Glazed.VP-FD60
  • £191.80
  • £230.16

Glazed to Order Ply FD60 Glazed VP Fire Door - Un-finished Paint-Grade Door Faces
- 54mm Internal ( One Hour ) Firecheck Glass Vision-Panels installed in Millenium Ply 1-Hour Fire Doors


Glazed to Order Ply VP 1-Hour Fire Doors need to be ordered with a Haulage Charge based on the delivery postcode - JAS Delivery - Please contact us;

- Premdor no longer keeps this Plywood Firemaster Door as a stock Fire Door size;
- We are able to get the Strebord-54 FD60 Millenium Ply 1-Hour Fire Door in 2 weeks, then 1 week for Glazing.
FD60 Glazed to Order, BWF Certified Ply VP Fire Doors are
made to your specifi­cation as a Special Order;
- Once ordered, the manuf­ac­turing process will begin, and there can be no alteration or cancel­lation.

- Hardwood is a natural material - variations in knots, colour and grain should be expected; they are not faults.
- Colours depicted are repre­sen­tative only, and Your Door will not be exactly the same.
- We cannot match to any existing Plywood Fire Doors because of these variations.


We can offer sequence matched Hardwood Real-veneers for the best colour match; Please inform us if you require this service.

Premdor FD60 Popular Paint Grade Firedoors can also be supplied without any vision panel - Premdor Flush FD30 & FD60 Fire Doors
Other veneers are available: Anegre - Ash - Beech - Koto - Maple - Oak - Sapele - Walnut - Premdor Glazed VP Fire Doors

Popular FD60 Fire Doors are suitable for Inspected work in Schools, Hospitals, Office, Industry or at home, for inpection by the Building Inspector or Fire Officer. Ply type FD60 fire doors have demonstrated a sound reduction value of up to 34RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E - see Spec.

Popular Fire Doors can be supplied to special sizes - cut to height or width and re-lipped;
They can manufactured to confi­gura­tion, eg Pair Fire-Doors in equal or unequal widths;
Pair Fire Doors can be made with square or rebated meeting-stiles - (Normal handing for rebated Fire Door Pairs is for the Left-Hand Door to open away first, but Right-Hand opening away first can be specified.);
They can also be manufactured with Bespoke Glass-Openings to your Firecheck specifi­cation, and glazed with various Safety-Wired or Clear-Pyro glazing options: PyroShield, PyroDur & PyroGuard - Apertures can be made to size, and even with circular glass openings - see Spec.
- Some standard Clear Glazed Wired & Fully Clear C760 Laminated Glass options are shown in the drop-down menu above;

The work is carried out in the Factory under the BWF Certifier Scheme, so that the final Popular VP FD60 Firedoor retains its certificate, to comply with the current Building Regulations. Every procedure and all materials are covered by the BWF Fire Door & Doorset Scheme; The Tamper Evident BWF label is fitted to all made to size Popular Glazed FD60 Firedoors; All details and specifi­cations are completely traceable and produced by BWF Certifire Manuf­ac­turers.

FD60 Glazed Firemaster Fire Doors can be supplied with real veneers - Glazed FD60 Anegre - Glazed FD60 Ash - Glazed FD60 Beech - Glazed FD60 Durador - Glazed FD60 Koto - Glazed FD60 MapleGlazed FD60 Oak - Glazed FD60 Sapele - Glazed FD60 Walnut + Glazed FD60 White Primed and as Solid FD60 Firemaster doors Premdor FD60 & FD30 Fire Doors

For Made to Measure Fire Doors ( with or without Glazed Vision Panels ) -Made to Size FD60 & FD30 Fire Doors

All manuf­ac­turers Standard-size, panelled, Glazed & Archi­tec­tural V-Groove Fire Doors - All Fire Doors

How to Install an Internal Fire Door :

FD60 Ply-type Glazed VP One Hour 54mm Fire Door :

The Plywood flush paint-grade FD60 fire-door thickness is 54mm with 6mm unfinished exposed lippings ( Veneered Doors have concealed lippings ).

Glazed Vision Panel sizes :
  1G = 450x450mm ( less beading, the glass size is appro­ximately 422x422mm )
- Door margins - Top 127mm + Glass Central;
  2G = 700x450mm ( less beading, the glass size is appro­ximately 672x422mm )
- Door margins - Top 127mm + Glass Central;
  3G = 700x150mm ( less beading, the glass size is appro­ximately 672x122mm )
- Door margins - Top 127mm + Side 127mm + Offset Glass;
  5G = 2 x 700x150mm ( less beading, the glass size is appro­ximately 672x122mm )
- Door margins - Top 127mm + Side 127mm + Offset Glass;
  7G = 914x150mm ( less beading, the glass size is appro­ximately 886x122mm )
- Door margins - Top 127mm + Side 127mm + Offset Glass;
  8G = 914x508mm ( 762mm & wider; less beading, the glass size is appro­ximately 886x480mm)
- Door margins - Top 127mm + Glass Central;
  9G = 450mm diameter ( less beading, the glass size is appro­ximately 422mm dia. )
- Door margins - Top 127mm + Glass Central;
10G = 5 VP's x 245x245mm ( less beading, the glass size is appro­ximately 217x217mm )
- Door margins - Top 127mm + Glass Central;
16G = To DDA specifi­cations 2 VP's Top - 775mm x150mm / Bottom - 700mm x150mm
( less beading, the glass size is appro­ximately 747 & 672x122mm )
- Door margins - Top 127mm + Side 127mm + Offset Glass;
18G = 1150x150mm ( less beading, the glass size is appro­ximately 1122x122mm )
- Door margins - Top 127mm + Side 127mm + Offset Glass;
19G = 1654x508mm ( 762mm & wider; less beading, the glass size is appro­ximately 1626x480mm )
- Door margins - Top 127mm + Glass Central;
19G = 1654x400mm ( For 610-686mm widths; less beading, the glass size is appro­ximately 1626x372mm)
- Door margins - Top 127mm + Glass Central;
20G = 1440x150mm (less beading, the glass size is appro­ximately 1412x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;

Vision Panel VP sizes above are the actual Door Cut-Out sizes from the Popular Plywood Door;
The beading then covers the glass by 14mm (ie The Glass Size is 28mm smaller on Height and Width.)
Margins are measured to the VP Cut-Out from the Fire Door edge.

- Bespoke Non-standard size Vision Panels can be made - poa;
- Vision Panels glazed with Obscure or other Special Fire Glasses are possible - poa;
- Vision Panels glazed with Georgian Clear Fire-safety wired Glass GWPP - Select in the Drop-Down Menu -
- Clear Pyro Polished Plate Glass (no wire) C760 - Select in the Drop-Down Menu -

- Glazing bead is Foil-wrapped Hardwood-effect MDF or Solid Hardwood, and will protrude over the edges of the glass, and outside the thickness of the door; Solid Hardwood Timber Bead can be specified - poa;
- Intumescent fire/smoke seal is included for 3 edges - Top & both sides;
- Door Lippings are Real Hardwood or similar species, and may be concealed or exposed, and may only be on two long edges;
- Clear-Satin lacquered finish Door Faces are Real-veneer Hardwood, or similar species;
- Fire Door Casings - Fire Door Linings - Pair Fire Door Frames - Select in the Drop-Down Menu -

Specifi­cation : Premdor Popular Firemaster FD60 Spec. Sheet

Acoustics: Popular FD60 fire doors have demonstrated a sound reduction value of up to 34RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E.

Plywood Glazed Firedoors need care from purchase, during fitting, and throughout their lifespan;
Guidelines for door fitting, and door care are laid out by the British Woodworking Federation:
 BWF Door Care
Premdor Popular Glazed VP Fire Doors have a copy of the manuf­ac­turers instructions included in the packaging.
Check in particular, any fitting tolerances, or wood-stains you wish to use, are within the manuf­ac­turer's recom­men­dations;


(Waxes, oils, varnishes or water-based woodstains are NOT suitable. Maximum size reduction on fitting is 3mm per stile for Premdor Ply Glazed VP Fire Doors; It is often possible to cut more off a door, but this is at your own risk, and may contravene the Fire Certificate.)

Follow Premdor door care and maintenance advice for treatment of your Ply Glazed VP Fire Door, and to validate their guarantee;

We are able to supply certified Premdor Ply Glazed VP Firemaster Doors with our Chain of Custody Certi­fica­tions - CoC :
JAS Timber CoC Certi­fica­tion - Ply Glazed FD60 Door INT-COC-003944.­150 & Ply Glazed FD60 Door INT-PEFC/­COC-001119.­150 
- POA;

- We cannot be held responsible for any variations in machined Ply FD60 Glazed VP Fire Door sizes, pattern, grading, moisture content, treatment, certi­fica­tion, knots, colour or grain.
- If it is important, then you need to check these or any other details before commencing work & notify us in writing on your order.

- Check all component dimensions, mouldings and glazing are correct prior to any work on site;
- It is the purchaser's respon­sibility to check the suitability of this Fire Door & its certi­fica­tion, in conjunction with the intumescent strip, door frame with surround, hardware & the situation of use.
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot cancel or exchange any Glazed Ply Fire Door after order - Popular Glazed VP Firemaster Doors are supplied as a Special Order.
- Once ordered, the manuf­ac­turing process will begin, and there can be no alteration or cancel­lation.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Plywood FD60 VP Fire Doors can be bought online - Select the Fire Door size, Glazed VP size and any Intumescent Strip or Fire Casing that you require in the drop-down menus and add to basket; Then continue shopping if there are more Fire Doors, or other items to order. ( To see your ongoing Order Total or to amend it, click the small Checkout Trolley icon at the Top-RHS of the page in the Green Navigation-bar. ) Glazed Fire Doors need to be ordered with a haulier delivery charge - Haulier Delivery - Please contact us - 01254 54000

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Glazed Ply FD60 Fire Doors.
3_Credit_Cards_logo

Direct Delivery of One Hour Glazed Plywood FD60 Firedoors
- poa;

Alternative Delivery - Please contact us about these other methods below - 01254 54000

Van Delivery of Ply Glazed VP FD60 Fire Doors on our van, in Blackburn, Lancashire and the North-West, from £5 +vat, or £1 +vat per mile - poa; ( from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat; )

The chargeable carriage weights of Glazed FD60 VP Plywood Flush Fire Doors may be shown in Kg:
VPFD60PLY23 78x27 Flush Ply Glazed Real-Veneer Fire Door - 36Kg;
VPFD60PLY26 78x30 Flush Ply Glazed Real-Veneer Fire Door - 38Kg;
VPFD60PLY29 78x33 Flush Ply Glazed Real-Veneer Fire Door - 40Kg;
VPFD60PLY28 80x32 Flush Ply Glazed Real-Veneer Fire Door - 40Kg;
VPFD60PLY626 2040x626x54mm Flush Ply Glazed Real-Veneer Fire Door - 36Kg;
VPFD60PLY726 2040x726x54mm Flush Ply Glazed Real-Veneer Fire Door - 38Kg;
VPFD60PLY826 2040x826x54mm Flush Ply Glazed Real-Veneer Fire Door - 40Kg;
VPFD60PLY926 2040x926x54mm Flush Ply Glazed Real-Veneer Fire Door - 42Kg;

Carrier Delivery of Ply Glazed VP Fire Doors is not possible.

Haulier Delivery of Plywood Glazed Doors by Door Pallet is available from £68 to £140 +vat -
Zone A mainland - poa other zones;

( Please tell us the delivery post-code for your enquiry about One-Hour Ply Flush Glazed Fire Doors, so that we can quote for shipping. )

  • The March 2020 Glazed VP Fire Door Price List is current - 01/08/2020
  • Please phone us at JAS Timber for any further details about Glazed Plywood Fire Doors - 01254 54000

E.&O.E. see T&C - We do try to keep prices and specifi­cations of Glazed FD60 Ply Fire Doors correct, but mistakes can be made! Please let us us know if you do spot any errors - thanks.