JAS Timber

PLAS : Full Length 2800mm *Woodgrain Colours* (18mm) - MFC

Swiss Pear Plas MFC
  • Swiss Pear Plas MFC
  • H1582 Ellmau Beech MFC Panelplas
  • H1342 Montana Oak MFC PanelPlas
  • Natural Walnut 2800mm Plas
  • Pippy Oak Plas MFC
  • H3704 Tobacco Walnut MFC PanelPlas
Product code 27010-2800mm-18mm-Woodgrain-Plas
  • £9.20
  • £11.04

3/4" *Woodgrain-Coloured* Plas Board - 18mm MFC x 2800mm - L2LE
- Panelplas Board - Lipped 2 Long Edges -
   
18mm PLAS WOODGRAIN COLOURS CAN NOW BE ORDERED ONLINE -
SELECT THE SIZE, THEN COLOUR & QUANTITY THAT YOU WANT FROM THE DROP DOWN MENU & ADD TO BASKET;
THE WEIGHT IS THEN CALCULATED, AND CARRIER DELIVERY CHARGE IS SHOWN - 01­/11/2016 -

WE CANNOT SEND FULL 2800mm LENGTHS BY CARRIER; TELL US THE SIZES WE CAN CUT TO FOR CARRIAGE & ADD THE NUMBER OF CUTS - YARD CUTTING
   
- Woodgrain coloured Chipboard Plas Panel from Panelco may be from Egger, Kronospan, Sonae or a similar Wodega imported board with a chipboard density of ap­pro­xima­tely 600/650; Woodgrain Plas can have a very slight sheen, and light woodgrain texture.

FSC CERTIFIED - FSC MIX from responsible sources - C005701 -
    
COLOURS ARE SHOWN AS A GUIDE ONLY;
Variations are possible because an image will be shown differently from one computer monitor to another;
Glaze and texture are a further complexity that cannot be shown on a screen!

   
IF YOU ARE NEEDING A SPECIFIC COLOUR SHADE - YOU CAN ORDER A SAMPLE FROM - PANELCO.COM
   
PLEASE QUOTE THE COLOUR CODE FROM THE SAMPLE, WHEN YOU ORDER WITH US;
    
This COLOURED PLAS is a product we have to order - usually we get a delivery once a week from our supplier - Panelco; A Montague-Meyer company.
We keep WHITE PLAS and IVORY/SAND PLAS Lipped 2 Long Edges in stock in all the widths;
- 14 Colours are available to order in 15mm Woodgrain Plas Imperial 8' lengths in 9 widths - 15mm IMPERIAL SIZE PLAS
- 7 Colours are available to order in 15mm Woodgrain Plas metric 2620mm or 2800mm lengths in 7 widths - 15mm METRIC SIZE PLAS

18mm Woodgrain coloured MFC Chipboard Plas Panels

From Panelco - They may be from Egger, Kronospan, Sonae or a similar Wodega imported board with a chipboard density of ap­pro­xima­tely 600/650Kg per M3; Woodgrain Plas can have a very slight sheen, and light woodgrain texture.

COLOURS ARE SHOWN AS A GUIDE ONLY;
Variations are possible because an image will be shown differently from one computer monitor to another;
Glaze and texture are a further complexity that cannot be shown on a screen!


IF YOU ARE NEEDING A SPECIFIC COLOUR SHADE - YOU CAN ORDER A SAMPLE FROM - PANELCO.COM

PLEASE QUOTE THE COLOUR CODE FROM THE SAMPLE, WHEN YOU ORDER WITH US;

Matt Coloured Plas - Contiplas type chipboard panels faced with a wipe down matt plastic coating. Plas panels can be used in many applications including furniture &­ shelving, shopfitting, kitchens, bedrooms, hotels,­ caravans and so many more. The Plas boards up to 610mm wide are edged on two long edges, 8x4 sheets are unedged. An iron-on pre-glued plas-panel edging tape is available to match the plas colour, for board ends and any cut edges.

- Plas is Melamine Faced Chipboard - MFC;
- Contiplas and Contiboard are brand names;
- Edged 2 long edges up to 910mm
- 2800x2070mm & 2620x2070mm sheets are un-edged;
- 15mm White Plas & Ivory/Sand Plas 11 widths in stock;
- 14 Colours available to order in 15mm woodgrain Plas / 9 widths;
- White & Ivory/Sand 8x4 sheets un-edged in stock;
- 1830mm & 2800mm sheets available to order;
- Furniture board available in 18mm thickness x 2800mm.
   
We keep WHITE PLAS and IVORY/SAND PLAS in stock in all the widths;
This COLOURED PLAS is to order - usually we get a delivery once a week from our supplier - Panelco; A Montague-Meyer company.
   
FSC CERTIFIED - FSC MIX from responsible sources - C005701 -

SAMPLES CAN BE ORDERED FROM the PANELCO WEBSITE (Click on PRODUCTS) - PANELCO.COM

Sizes may be the usual panel NOMINAL size that the MFC Board is manufactured to,­ with a finished size that is generally obtained; MFC panel sizes are generally ±1mm on thickness / ±2mm on width, ±6mm cross-cutting tolerance & there may be one splitter saw cut-edge;­ This is the size immediately after ma­nuf­ac­tu­ring the board, and does not take into account any movement later, caused by moisture movement into, or out of the MFC Panel. (Be aware: For a multitude of reasons, size and profile of MFC timber panels may vary from batch to batch, so it is best to purchase all you need for a job in one go, rather than buying more at a later date.)

WE ARE ABLE TO SUPPLY FSC or PEFC CERTIFIED MFC BOARDS WITH OUR CHAIN OF CUSTODY CER­TI­FICA­TI­ONS - CoC :
JAS TIMBER CoC CERTI­FICA­TI­ON - MFC BMT-PEFC-1119.­150 or MFC TT-CoC-003944.­150 
- POA;

- We cannot be held responsible for any variations in machined MFC PANEL sizes, pattern, grading, moisture content, treatment, cer­ti­fica­ti­on, knots, colour or grain.
- If it is important, then you need to check these or any other details before commencing work & notify us in writing on your order.

- Check all component dimensions, mouldings, glazing or any other details are correct prior to any work on site;
- JAS Timber cannot be held liable for the consequences of any variation;

- We cannot exchange any Timber Product once work has commenced; Larger orders and Direct Deliveries of Coloured MFC Panel are supplied as a Special Order.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use
21st Aug 2015, 12:09
Keith
My order has arrived in good condition, great service.

We can now take Debit Card, BACS, Cash, Cheque or Credit Card payment online for 18mm Woodgrain Colour Plas Board (there is a 3% bank charge for credit cards) -
3_Credit_Cards_logo
DELIVERY of 18mm Coloured Plas on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa; (from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;) 

Approximate Coloured Plas panel weights, with packaging, are -
160x2800mm 18mm coloured plas = 5.5Kg
300x2800mm 18mm coloured plas = 10.5Kg
438x2800mm 18mm coloured plas = 10.5Kg
500x2800mm 18mm coloured plas = 17.5Kg
570x2800mm 18mm coloured plas = 20Kg
610x2800mm 18mm coloured plas = 23.5Kg


CARRIER DELIVERY of Plas is possible from £9.60 +vat - up to 10Kg/2.4M., then 50p per Kg; - up to 3.0 M. - poa;
Anything longer is not suitable unless in pallet quantities; ( Zone A mainland - poa other zones)

HAULIER DELIVERY of Plas MFC Sheets could be arranged for larger pallet quantities;

DIRECT DELIVERY of Plas MFC Sheets may be possible to Trade Customers from some of our suppliers
- Especially in the Dundee, Glasgow & Edinburgh areas of Scotland, Bristol/­South-West & Stoke/­Midlands areas in England.

(Please tell us the post-code for your enquiry about 18mm Woodgrain Plas, so that we can quote for delivery.)

- The SEPTEMBER 2015 Panelco Plas Price List is current; - 02­/12/2016 -
- Please phone us at JAS Panel Products for any details about 18mm White MFC Plas - 01254 54000


- If you are matching to an existing colour of Plas, then it is advisable to check the colour and finish of the samples at our yard first, before ordering or commencing work -
- Due to the complexities of colour, glaze and texture of the plas surface and core, and possibility of differences from the various  ma­nuf­ac­tu­rers,­ JAS Timber will not accept liability for any variation -


E. & O.E. see T&C - We do try to keep prices and specifi­cati­ons of 18mm Woodgrain Plas correct, but mistakes can be made!