JAS Timber

OM013 18mm Oak Cushion Corner Mould - 18x18mm x 2.4 metres | CHOOSE 1 length OR/ 1 bundle = 10

OM014 Oak Cushion Corner
  • OM014 Oak Cushion Corner
  • OM014 Oak Cushion Corner
Product code 16022-OM013-Oak-Cushion-Corner
  • Was £10.60
  • Now £7.95
  • Now £9.54
25% discount
Valid until 31/05/2022

18mm Oak Cushion Corner Mould OM013 - finished size: 18x18mm x 2.4 metres - Oak
OM013 White-Oak 3/4 inch Eased-Corner Corner Bead from Cheshire Mouldings;

Other Mouldings and Beadings can be seen -
- Pine Mouldings
- Hardwood Mouldings
- Oak Mouldings

OM013 - 18x18mm Cushion Corner Mould is usually machined from 25mm KD American White Oak Board or similar species of timber -

The Cheshire Mouldings Timber Grading is to have a substantially knot free timber on three sides ( of the Oak timber, before machining to Cushion Corner Mould ). The grading allows several knots per piece, but in practice there are few knots in most pieces, and a few pieces may be knot free. The specification for timber bead from our suppliers also allows engineered and finger-jointed timbers to be used.

18mm Oak Cushion Corner Moulding should be treated and fixed in place as soon as possible to help minimise any movement/­twisting and surface checking/­splitting that occurs naturally with changes in moisture content; Small oak mouldings can not be recommended for use externally; External use of 18mm x 18mm Oak Cushion Corner Mould is at your own risk -

Sizes may be the usual timber nominal size that the 18mm Oak Cushion Corner Moulding is machined from, with a finished size that is generally obtained; Planed 18mm x 18mm Oak Cushion Corner Mould sizes are generally ± 1mm on thickness / ± 2mm on width, ± 10mm cross-cutting tolerance and there may be one splitter saw cut-edge; This is the size immediately after machining the timber, and cannot take into account any movement later, caused by moisture movement into, or out of the Oak Cushion Corner Bead. The size and profile of timber may vary from batch to batch, so it is best to purchase all you need for a job in one go, rather than buying more at a later date.

- JAS Timber cannot be held responsible for any variations in machined OM013 Oak Cushion Corner Mould sizes, pattern, construction, grading, moisture content, treatment, certification, knots, colour or grain.
- If it is important, then you need to check these or any other details before ordering, or commencing work & notify us in writing on your order.

We can supply certification for Prepared Oak Cushion Corner Mould with our Chain of Custody certificates, (CoC) : JAS Timber CoC Certification - for 18mm Oak Cushion Corner Mould INT-COC-003944.150 or 18mm Oak Cushion Corner Mould INT-PEFC­/COC-001119.150 - poa;

- Add to basket - 1 Certification Charge per different product, or moulding size - Cheshire Mouldings CoC PEFC Certification.

- Check all component dimensions, mouldings, glazing or any other details are correct prior to any work on site;
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot exchange any Oak Cushion Corner Mould once work has commenced. Larger orders of OM013 Cushion Corner Mould, and ALL Direct Deliveries are supplied as a Special Order.

Ideal as an external corner finishing bead, around door frames and window frames ( In a dry domestic internal location ).Machined from American White Oak, or similar species;

White Oak is a low to medium durability timber, so not recommended for external use.
European Oak is more durable externally, but will still need to be fully coated and maintained for exterior use.

Oak is a natural product - variations in knots, colour and grain should be expected - They are not defects.

There are no reviews yet.

Write a review

    Overall satisfaction
    Value for money
    Ease of use

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for OM013 Oak Corner Mouldings.
Van Delivery of 18mm Oak Cushion Corner Mould in Blackburn, Lancashire and the North-West, from £10.00 +vat 
- poa; ( from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat; )

Oak OM013 18x18mm Cushion Corner Mould weight is approximately 0.75Kg per 2.4 metre length - to include some packaging, careful packing and Tuffnells Zone-A Carrier Charge;
Prepared Oak 3/4 inch Cushion Corner can be purchased online - Just add to basket, which calculates carriage by weight; ( The basket is at the Top-RHS of the page, in the Green Navigation-bar - very small! )

Carrier Delivery of OM13 Oak Cushion Corner Bead Offer Lengths costs from £12.40 +vat - up to 10Kg and 2.4 metres x 400x400mm, then +50p per extra Kg; For 2.4 to 3 metres from £15 +vat more - poa; Anything longer is not suitable unless in pallet quantities to Zone A Mainland - poa other zones; The risk of damage is roughly 5% with carrier delivery, so we urge you NOT to sign for your consignment until you have checked it; Once signed for - ( "unchecked" isn't acceptable ), any carrier will deem that you have received your order in reasonable condition - It is then your responsibility; We have tried to intervene with the carrier - but they are immune to complaints.
You can choose an "Insured" Tracked Delivery for £6 +vat extra, by adding - TNT Carriage

Direct Delivery of OM013 18mm Oak Cushion-Corner from Cheshire Mouldings may be possible, & costs from £35 +vat per order
- poa; Don't forget, this price can include longer lengths such as Handrails and Baserails that are too long to be sent by our own carriers.

Haulier Delivery can be done for larger quantities of Oak Corner Mouldings.

( Please tell us the delivery post-code for your enquiry about Oak OM013 Cushion Round-Corner Mouldings, so that we can quote for shipping. )

  • The April 2021 Oak 25mm Oak Board Price List is current - 01/04/2021
  • The January 2022 Cheshire Mouldings Oak Beadings Price List is current - 01/02/2022
  • The January 2022 Richard Burbidge Timber Mouldings Price Lists are current - 01/02/2022
  • The Janaury 2022 Masons Timber Oak Mouldings Price List is current - 01/02/2022
  • Please phone us at JAS Timber for any further details about Oak 18mm Cushion Corner Profile Bead - 01254 54000

E.&O.E. see T&C - We try to keep prices and specifications of 18mm Oak Cushion Corner-Mould correct, please tell us if you see any errors.