Machining - Workshop Time
Timber Machining in the JAS Joinery Workshop - Time + Accuracy!
For Kitchen Worktops and Bedroom Worktops - Contact us - 01254 54000
There are complexities about which sides and edges need cutting, for Nosing and end protection etc.
For Plas or Veneered Plywood, using our sawbench with under-score blade reduces the spelching on the underside of the sheet.
We try to cut as accurately as possible -
This will probably be better than ±2mm rip-sawing or cross-cutting size tolerance for Timber,
and ±1mm size tolerance when rip-sawing the sheet length, or cross-cutting the sheet width, for Panel Products
This depends on how straight the starting product is.
Don't forget there will also be the thickness of the blade to allow for as well - about 4mm.
For Planing of Timber -
Accuracy will be better than ±1mm size tolerance, on our Timber Thicknesser for Planed Timber
Any tolerances or accuracy mentioned, are for the Timber or Panel Product size immediately after machining; It cannot take into account any movement of the component if moisture moves into, or out of it, afterwards. Generally, swelling will occur with uptake of moisture, and shrinkage with drying - but depending on grain or composition, twisting and surface checking/splitting can also occur.
For cutting for ease of delivery, and to reduce transit damage to Panel Products Select - Machining in Yard
For cutting on Plas and Veneered Boards select - Machining in Workshop to reduce the spelching on the underside of the sheet;
There are no reviews yet.
- £17.20 + VAT 20%
- £19.20 + VAT 20%
- £29.90 + VAT 20%
- £8.50 + VAT 20%
- £10.50 + VAT 20%
- £13.20 + VAT 20%
- £15.23 + VAT 20%
Payment & Delivery
Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Workshop Machining Charges.
- Please phone us at JAS Timber with any enquiries - 01254 54000