Machining in Yard - Cutting ( Rough size for Transport )
Machining in Yard - general cutting of sheet materials and timber:
Cross-cutting: We will cross-cut using a standard cross-cut machine fitted with a tungsten-tooth cross-cut blade.
Rip-sawing: We will cut items on a standard bench-saw fitted with a tungsten-tooth rip-saw blade.
We try to cut as accurately as possible, this will probably be ± 3mm rip-sawing or cross-cutting tolerance for timber, and ± 2mm rip-sawing or cross-cutting tolerance for panel-products.
Don't forget there will also be the thickness of the blade to allow for as well - (about 4mm) ;
Any tolerances or accuracy mentioned, are for the timber or panel product size immediately after machining; It cannot take into account any movement of the component if moisture moves into, or out of it, afterwards. Generally swelling will occur with uptake of moisture, and shrinkage with drying - but depending on grain or composition, twisting and surface checking/splitting can also occur.
For a greater accuracy, and for Plas and Veneered Boards we would advise selecting the Machining in Workshop option;
In the Workshop we can use our sawbench with under-score blade to reduce the spelching on the underside of the sheet.
For Planing and Workshop Time, see - Machining in Workshop - Time
- Check all component dimensions, or mouldings are correct prior to any work on site;
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot exchange any item once work has commenced.
There are no reviews yet.
- £13.20 + VAT 20%
- £20.00 + VAT 20%
- £27.00 + VAT 20%
- £29.90 + VAT 20%
- £8.50 + VAT 20%
- £13.00 + VAT 20%
- £17.00 + VAT 20%
- £20.00 + VAT 20%
Payment & Delivery
Payment - We can take Debit Card, BACS or Credit Card payment online for Yard Machining Charges
- Please phone us at JAS Timber for any enquiries : 01254 54000
Delivery should be shown on the product being purchased.