Machining in Workshop - Cutting

Price for a saw-cut on Plas or Veneered Plywood, using our sawbench with under-score blade to reduce the spelching on the underside of the sheet.

We try to cut as accurately as possible, this will probably be ±2^mm rip-sawing or cross-cutting tolerance, and ±1^mm rip-sawing or cross-cutting tolerance for panel-products.
Don't forget there will also be the thickness of the blade to allow for as well - (about 4^mm);

Any tolerances or accuracy mentioned, are for the timber or panel product size immediately after machining; It cannot take into account any movement of the component if moisture moves into, or out of it, after the machining. Generally swelling will occur with uptake of moisture, and shrinkage with drying - but this also depends on grain or composition; Twisting and surface checking/­splitting can also occur.

For Plas, Veneered and Plywood Boards we would advise selecting this Machining in Workshop option, to reduce the spelching on the underside of the sheet;

For Planing and Workshop Time, see - Machining in Workshop - Time

For general cutting, for ease of handling and for transport see - Machining in Yard

The maximum thickness that we can cut is 70^mm.

For Kitchen Worktops and Bedroom Worktops - Contact us  as there are further complexities in cutting (Nosing and end protection etc.)