MACHINING in Workshop - CUTTING
MACHINING in Workshop - Cutting
Price for a saw-cut on Plas or Veneered Plywood, using our sawbench with under-score blade to reduce the spelching on the underside of the sheet.
We try to cut as accurately as possible, this will probably be ±2mm rip-sawing or cross-cutting tolerance, and ±1mm rip-sawing or cross-cutting tolerance for panel-products.
Don't forget there will also be the thickness of the blade to allow for as well - (about 4mm);
Any tolerances or accuracy mentioned, are for the timber or panel product size immediately after machining; It cannot take into account any movement of the component if moisture moves into, or out of it, afterwards. Generally swelling will occur with uptake of moisture, and shrinkage with drying - but depending on grain or composition, twisting and surface checking/splitting can also occur.
For Plas, Veneered and Plywood Boards we would advise selecting this Machining in Workshop option, to reduce the spelching on the underside of the sheet;
For Planing and Workshop Time, see - Machining in Workshop - Time
For general cutting, for ease of handling and for transport see - Machining in Yard
The maximum thickness that we can cut is 70mm.
For Kitchen Worktops and Bedroom Worktops - Contact us as there are further complexities in cutting (Nosing and end protection etc.)
There are no reviews yet.
- £9.00 + VAT 20%
- £14.90 + VAT 20%
- £18.35 + VAT 20%
- £29.90 + VAT 20%
- £8.50 + VAT 20%
- £9.15 + VAT 20%
- £11.40 + VAT 20%
- £15.23 + VAT 20%
- £4.60 + VAT 20%
Payment & Delivery
Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Workshop Machining Charges (there is a 3% bank charge for credit cards)
- Please phone us at JAS Timber for any enquiries : 01254 54000
Delivery is shown on the product being purchased.