JAS Timber

Koto Glazed VP FD60 Fire Door - One-Hour 54mm Internal Premdor® with Vision Panel Glazed to Order

Koto FD30 Glazed Fire Door - Type 8G VP
  • Koto FD30 Glazed Fire Door - Type 8G VP
  • Koto-3G-Fire-Door
  • Koto-1G-Fire-Door
  • Koto-7G-Fire-Door
  • Koto FireMaster FD60 Fire Door
  • Koto Glazed FD30 Fire-Door Made to Size - 5G VP
  • Ash MtM FD30 Fire-Door 5VP Type10
  • Ash FD30 MtM Fire-Door 1 Circular VP - Type 9
  • Ply 1G Glazed VP Fire Door
  • Ash-FD60-Fire-Door
  • Beech Glazed Fire Door - 20G VP
  • Maple Glazed FD30 Fire Door - 1G VP
  • Cherry Glazed FD30 Fire Door - DDA 16G VP
  • FD60 Fire-Door Certificate-1
  • FD60 Fire-Door Certificate-2
  • FD60 Fire-Door Certificate-3
Product code 3008P004-Koto-FD60-VP-Fire-Door
  • £196.00
  • £235.20

Glazed to Order Koto FD60 Glazed VP Fire Door - Pre-finished Koto real-veneer -
- 54mm Internal (One Hour) Fire-Check Glass Vision-Panels  installed in Premdor FireMaster Koto Fire Doors


- Premdor does not keep this Koto Firemaster Door as a stock Fire Door -
- We are able to get the Strebord-54 FD60 Millenium Koto 1-Hour Fire Door glazed in 3 weeks.
FD60 Glazed to Order, BWF Certified Koto Fire Doors are made to your specifi­cation;

- Once ordered, the manufacturing process will begin, and there can be no alteration or cancellation.

POA - New Reg. Hardwood Fire Casings

- Koto is a natural material - variations in knots, colour and grain should be expected; They are not defects.
- We cannot match to any existing Koto Fire Doors because of this variation - Colours depicted are repre­sen­tative only.
- We can offer Sequence-matched Koto Real-veneers for the best colour match - poa;

These Glazed FD60 Koto Firedoors are suitable for Inspected work in Schools, Hospitals, Doctor's Surgeries, Shops, Pubs, Hotels, Offices, Industry or at home, for inspection by your Building Inspector or Fire Officer. Koto is a medium colour hardwood with a teak-like grain. Real-veneer Koto Fire Doors have a Clear-Satin Lacquer finish on both faces, and not the lippings. Koto FD60 fire doors have demonstrated a sound reduction value of up to 34RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E - see Spec. tab above.

Koto Fire Doors can be manufactured with Bespoke Glass-Openings to your Firecheck specifi­cation, and glazed with various Safety-Wired or Clear-Pyro glazing options: PyroShield, PyroDur & PyroGuard - Apertures can be made to size, and even with circular glass openings - see Spec. tab above - Some standard Clear Glazed Wired & Fully Clear C760 Laminated Glass options are shown in the drop-down menu above;

FD60 Glazed Firemaster Fire Doors can be supplied with other veneers - Glazed FD60 Anegre - Glazed FD60 Ash - Glazed FD60 Beech - Glazed FD60 Durador - Glazed FD60 MapleGlazed FD60 Oak - Glazed FD60 Sapele - Glazed FD60 Walnut + Glazed FD60 Plywood + Glazed FD60 White Primed and as Solid FD60 Firemaster doors Premdor FD60 & FD30 Fire Doors

For Made to Measure Fire Doors ( with or without Glazed Vision Panels ) -Made to Size FD60 & FD30 Fire Doors

All manufacturers Standard-size, Panelled, Glazed & Architectural V-Groove Fire Doors - All Fire Doors

How to Install an Internal Premdor® Fire Door :

Koto VP Firemaster FD60 Glazed Fire Door thickness is 54mm with 6mm Unfinished Concealed Lippings (Popular Plywood Doors have exposed lippings.);
- Koto real-veneer Glazed Fire Door - 54mm firedoor thickness, with 6mm Unfinished concealed Lippings (Popular Plywood Doors have exposed lippings.);

60-minute Fire-Glazed Vision Panel codes and sizes :
  1G = 450x450mm (less beading, the glass size is approximately 422x422mm) Door margins - Top 127mm + Glass Central;
  2G = 700x450mm (less beading, the glass size is approximately 672x422mm) Door margins - Top 127mm + Glass Central;
  3G = 700x150mm (less beading, the glass size is approximately 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  5G = 2 x 700x150mm (less beading, the glass size is approximately 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  7G = 914x150mm (less beading, the glass size is approximately 886x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  8G = 914x508mm (762mm+ Doors; less beading, the glass size is approximately 886x480mm) Door margins - Top 127mm + Glass Central;
  9G = 450mm diameter (less beading, the glass size is approximately 422mm dia.) Door margins - Top 127mm + Glass Central;
10G = 5 x 245x245mm (less beading, the glass size is approximately 217x217mm) Door margins - Top 127mm + Glass Central;
16G = DDA 775mmTOP 700mmBOTTOM x150mm (less beading, the glass size is approximately 747 & 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
18G = 1150x150mm (less beading, the glass size is approximately 1122x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
19G = 1654x508mm (762mm+ Doors; less beading, the glass size is approximately 1626x480mm) Door margins - Top 127mm + Glass Central;
19G = 1654x400mm (610-686mm Doors; less beading, the glass size is approximately 1626x372mm) Door margins - Top 127mm + Glass Central;
20G = 1440x150mm (less beading, the glass size is approximately 1412x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
Bespoke Non-standard size Vision Panels can be made - poa;

Where Vision Panel size is mentioned, this is the actual cut-out size from the Koto Fire Door;
The Beading then covers the glass by 14mm (ie the glass size is 28mm smaller on each dimension - Height & Width.)
Margins are measured to the cut-out size from the Fire Door edge.


- Vision Panels glazed with Georgian Clear Fire-safety wired Glass GWPP - Select in the Drop-Down Menu -
- Clear Pyro Polished Plate Glass (no wire) C760 - Select in the Drop-Down Menu -
- Vision Panels glazed with Obscure or other Special Fire Glasses are possible - poa; 

- Glazing bead is Foil-wrapped Koto MDF, and will protrude over the edges of the glass, and outside the thickness of the door; Solid Koto Timber Bead can be specified - poa;
- Intumescent fire/smoke seal is included for 3 edges - Top & both sides;
- Unfinished Door Lippings are Real Koto or similar species, and may be concealed or exposed, and may only be on two long edges;
- Clear-Satin lacquered finish Door Faces are Real-veneer Koto, or similar species;
- Fire Door Casings - Fire Door Linings - Pair Fire Door Frames - Select in the Drop-Down Menu -

Koto FD60 fire doors have demonstrated a sound reduction value of up to 34RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E - see Premdor Koto Veneered One-Hour 54mm Fire Door Specification : Premdor Koto Firemaster FD60 Spec. Sheet

Koto FD60 Glazed Fire Doors need care from purchase, during fitting, and throughout their lifespan;
Guidelines for door fitting, and door care are laid out by the British Woodworking Federation:
BWF Door Care  
Premdoor Koto VP doors have a copy of the manufacturers instructions included in the packaging.
Check in particular, any fitting tolerances, or wood-stains you wish to use, are within the manufacturer's recom­men­dations;


(Waxes, oils, varnishes or water-based woodstains are NOT suitable. Maximum size reduction on fitting is 3mm per stile for Premdor FD60 Glazed Koto Fire Doors; It is often possible to cut more off a door, but this is at your own risk, and may contravene the Fire Certificate.)

Follow Premdor door care and maintenance advice for treatment of your door, and to validate their guarantee;

- Check all component dimensions, mouldings, and glazing are correct prior to any work on site;
- It is the purchaser's respon­sibility to check the suitability of this Fire Door & its certi­fica­tion, in conjunction with the intumescent strip, door frame with surround, hardware & the situation of use.
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot cancel or exchange any Koto VP Fire Door after order - Koto Glazed FD60 Doors are supplied as a Special Order;
- Once ordered, the manufacturing process will begin, and there can be no alteration or cancellation.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Koto FD60 Glazed Fire Door Blanks can be ordered online; (Please contact us regarding Delivery Cost to your postcode.) 
Add to basket, then please 
Continue Shopping <--- & Add (...) of the delivery item in basket: JAS Fire Door Delivery
At present Glazed Koto 1-Hour Fire Door manuf­ac­tu­ering time is approximately 7 week for non-stock Premdor Doors - or 4 weeks for Strebord-54 Koto Fire Doors

Payment - We can now take Debit Card, BACS or Credit Card payment online for Made to Order Glazed 1-Hour Koto Fire Doors
3_Credit_Cards_logo
Van Delivery of FD60 Glazed to Order Koto Fire Doors on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa (from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;)

The approximate weights of MtO One Hour FD60 Glazed VP Koto Fire Doors are shown in Kg:
VPFD60KOT23 78x27 Flush FD60 Koto Firedoor - 32Kg;
VPFD60KOT26 78x30 Flush FD60 Koto Firedoor - 34Kg;
VPFD60KOT29 78x33 Flush FD60 Koto Firedoor - 36Kg;
VPFD60KOT32 80x32 Flush FD60 Koto Firedoor - 36Kg;
VPFD60KOT626 2040x626x54mm Flush FD60 Koto Firedoor - 32Kg;
VPFD60KOT726 2040x726x54mm Flush FD60 Koto Firedoor - 34Kg;
VPFD60KOT826 2040x826x54mm Flush FD60 Koto Firedoor - 36Kg;
VPFD60KOT926 2040x926x54mm Flush FD60 Koto Firedoor - 38Kg;

Carrier Delivery is not feasible for Koto VP MtO FD60 Firedoors;

Haulier Delivery is £68 - £98 +vat for a firedoor-size pallet
( Zone A mainland - poa other zones )

(Please tell us the post-code for your enquiry about 1 Hour Koto Glazed Vision Panel Fire Doors, so that we can quote for delivery.)

- The September 2017 Premdor Firedoor Price List is current - 01­/09/2017 -
- Please phone us a
t JAS Fire Doors for any details about Made to Order Premdor VP Koto FD60 Fire Doors - 01254 54000

E. & O.E. see T&C - We do try to keep prices and specifi­cations of FD60 & FD30 Glazed to Order Koto Firedoors correct, but mistakes can be made!