4" Flashband® Tape - 100mm x 10 Metre Roll - Denso® Flashband
4" Flashband Tape - Denso Flashing Tape - Grey Roof-Flashing Tape - 100mm x 10 Metre Roll
A Strong self-adhesive 4 inch Flashing Tape made of Coated Aluminium Foil and a Bitumen Adhesive;
- In Stock - 01/10/2019 -
Forms a strong waterproof seal by the simply pressing the Flashband Tape into place by hand, and roller.
Denso 100mm Flashing Tape: Flashband Roll - High quality, self adhesive flashing tape, for general repairs and sealing. Builders Flashband Tape is a lead coloured, crease resistant flashing tape with a smooth grey covering, with a high grade bitumen backing. Looks like lead, but easier to apply; Interleaved for easy handling.
See other sizes of Denso Flashing Tape, Flashband uses and how to apply Flashing Tape - Denso Flashband Tape
Do you need Flashband Primer? See - Denso Flashing Tape Primer
This product contains petroleum products which may affect the skin; for full application instructions see "Instructions for Use" worksheet.
Be confident to use Denso Flashband - It will last for years to come!
It is not a temporary repair product - It is also used in new build work.
Technical Data Sheets for 24" Flashband are on the Denso website - 600mm Denso Flashing Tape
4 inch Denso Flashband® Tape may be used to flash over Felted, Mastic-asphalt and other Bituminous roofs; Asbestos-cement, Concrete, Stone-flag or Slate roofs; Aluminium sheet, Epoxy-coated sheet and Galvanized sheet roofs;
Breaking Strength 4.5 N/mm
Elongation @ break 100%
Adhesion Strength 4.5 N/mm width (ASTM D1000)
Adheres to: Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics;
Temperature Range for Application 5°C to 40°C & for Service 80°C (maximum short term)
Roll Length - 10 metres minimum
Thickness 1.0mm Weight 1.0 kg/m² average
Recommended Primer - Denso Flashing Tape Primer;
Technical Data Sheets for 4" Flashband are on the Denso website - 100mm Denso Flashing Tape
This product contains petroleum products which may affect the skin;
For full application instructions see "Instructions for Use" worksheet - www.denso.net
Denso® 100mm Flashing Tape: 4" Flashband Tape - High quality, self adhesive flashing tape, for general repairs and sealing. 4" Builders Flashband Tape is a lead coloured, crease resistant flashing tape with a smooth grey covering, with a high grade bitumen backing. Looks like lead, but easier to apply; Interleaved for easy handling. 4" Denso Flashband tape has an aluminium foil laminate embedded within the bitumen layers to give greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints, in service, without the loss of adhesion or splitting. 100mm Denso Flashing Tape is a robust Domestic & Commercial Building Product that will last for many years, so you can confidently use this flashing to make new or repair old flashings & soakers in brickwork, and use wider Flashband Tape for valley gutters.
100mm Flashband Tape can be used to flash to Parapet walls, Chimney stacks, Window-kerbs, Upstands & can be used for soakers and joints between brickwork and timber studding prior to tile or slate hanging.
4" Flashband Tape can flash round projections through roofs (cold pipes, roof lights, extractor vents), and as a protective wrapping of insulation covered pipes and tanks.
100mm Flashband Tape may be used to repair lead flashings, felt roofs, cracked roof tiles or slates, cement fibre corrugated sheets, and asbestos cement sheets (sealing in any asbestos fibre!).
4" Flashband Tape seals glazing bars and roof lights in greenhouses, conservatories, and roof-lights.
See other sizes of Denso Flashing Tape - Denso Flashband Tape
Clean all surfaces to remove grease or loose debris. If the surface is porous or has a rough or uneven profile, apply Flashband Primer before fixing the flashing strip. Do you need Flashband Primer? - Denso Flashing Tape Primer
There are no reviews yet.
- £29.00 + VAT 20%
- £43.50 + VAT 20%
- £58.00 + VAT 20%
- £7.30 + VAT 20%
- £14.50 + VAT 20%
- £21.80 + VAT 20%
- £10.10 + VAT 20%
Payment & Delivery
Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Denso® 100mm Flashband Tape.
Van Delivery of 4" Flashband Tape on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa (from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;)
The chargeable carriage weight of 4 inch Flashband Tape is 6Kg per roll;
Carrier Delivery of 100mm Denso Flashband Roof Tape is possible from £11.40 +vat - up to 10Kg/2.4 metres, then 50p per Kg - Zone A Mainland - poa other zones;
( Please tell us the post-code for your enquiry about 4" Denso Flashband Tape, so that we can quote for delivery. )
- The January 2019 Denso Flashband Tape Price List is current - 02/09/2019
- Please phone us at JAS Timber for any further details about 4" Bitumen Flashband Tapes - 01254 54000
E. & O.E. see T&C - We do try to keep prices and specifications of 100mm Denso Flashing Tape correct, but mistakes can be made!