JAS Timber

Durador-Match™ Glazed VP FD60 Fire Door - One-Hour 54mm Internal Premdor® FireMaster with Vision Panel GtO

Maple Glazed FD30 Fire Door - 1G VP
  • Maple Glazed FD30 Fire Door - 1G VP
  • Durador FD60 1-Hour Fire Door
  • Ash FD30 MtM Fire-Door 1 Circular VP - Type 9
  • Beech Glazed Fire Door - 20G VP
  • Ash MtM FD30 Fire-Door 5VP Type10
  • Cherry Glazed FD30 Fire Door - DDA 16G VP
  • FD60 Fire-Door Certificate-1
  • FD60 Fire-Door Certificate-2
  • FD60 Fire-Door Certificate-3
Product code 3008P-FD60-Durador-VP-Fire-Door
  • £175.00
  • £210.00

Glazed to Order DuradorTM FD60 Glazed VP Fire Door - Pre-finished Durador real-veneer -
- 54mm Internal (One Hour) Fire-Check Glass Vision-Panels  installed in Premdor Firemaster Durador Fire Doors

- Please contact us - This door is no longer in the Premdor Catalogue, but there is a Strebord alternative;

- We are able to get the Strebord 54 FD60 Millenium Plywood 1-Hour Fire Door in 2 weeks, then 2 weeks for glazing.
FD60 Glazed to Order, BWF Certified Durador Fire Doors are made to your specifi­cation;

- Once ordered, the Premdor component scheduling & manufacturing process will begin, and there can be no alteration or cancellation.

 POA - New Reg. Hardwood Fire Casings

- Hardwood is a natural material - variations in knots, colour and grain should be expected; They are not defects.
- We cannot match to any existing Hardwood Fire Doors because of this variation - Colours depicted are repre­sen­tative only.
- We can offer Sequence-matched Hardwood Real-veneers for the best colour match - poa;

These Glazed FD60 Durador Hardwood Firedoors are suitable for Inspected work in Schools, Hospitals, Doctor's Surgeries, Shops, Pubs, Hotels, Offices, Industry or at home, for inspection by your Building Inspector or Fire Officer. Oak is a medium colour hardwood with a figured grain, sometimes with small flecks. Real-veneer Oak Fire Doors have a Clear-Satin Lacquer finish on both faces, and not the lippings. Durador FD60 fire doors have demonstrated a sound reduction value of up to 34RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E - see SPEC. tab above.

Premdor FD60 Durador Firedoors can also be supplied without any vision panel - Premdor Flush FD30 & FD60 Fire Doors
Other veneers are available: Plywood + Anegre - Ash - Beech - Koto - Maple - Oak - Sapele - Walnut - Premdor Glazed VP Fire Doors

FD60 Glazed Firemaster Fire Doors can be supplied with other veneers - Glazed FD60 Anegre - Glazed FD60 Ash - Glazed FD60 Beech - Glazed FD60 Koto - Glazed FD60 MapleGlazed FD60 Oak - Glazed FD60 Sapele - Glazed FD60 Walnut + Glazed FD60 Plywood + Glazed FD60 White Primed and as Solid FD60 Firemaster doors Premdor FD60 & FD30 Fire Doors

For Made to Measure Fire Doors ( with or without Glazed Vision Panels ) -Made to Size FD60 & FD30 Fire Doors

All manufacturers Standard-size, Panelled, Glazed & Architectural V-Groove Fire Doors - All Fire Doors

How to install an Internal Premdor® Fire Door :

Durador Glazed FD60 Firemaster Fire Door Thickness is 54mm with 6mm Unfinished Concealed Lippings (Popular Plywood Doors have exposed lippings.);
- Glazed Vision Panel sizes :
  1G = 450x450mm (less beading, the glass size is approximately 422x422mm) Door margins - Top 127mm + Glass Central;
  2G = 700x450mm (less beading, the glass size is approximately 672x422mm) Door margins - Top 127mm + Glass Central;
  3G = 700x150mm (less beading, the glass size is approximately 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  5G = 2 x 700x150mm (less beading, the glass size is approximately 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  7G = 914x150mm (less beading, the glass size is approximately 886x122mm) Door margins - Top 127mm + Side 127mm  + Offset Glass;
  8G = 914x508mm (762mm+ Doors; less beading, the glass size is approximately 886x480mm) Door margins - Top 127mm + Glass Central;
  9G = 450mm diameter (less beading, the glass size is approximately 422mm dia.) Door margins - Top 127mm + Glass Central;
10G = 5 x 245x245mm (less beading, the glass size is approximately 217x217mm) Door margins - Top 127mm + Glass Central;
16G = DDA 775mmTOP 700mm BOTTOM x150mm (less beading, the glass size is approximately 747 & 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
18G = 1150x150mm (less beading, the glass size is approximately 1122x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
19G = 1654x508mm (762mm+ Doors; less beading, the glass size is approximately 1626x480mm) Door margins - Top 127mm + Glass Central;
19G = 1654x400mm (610-686mm Doors; less beading, the glass size is approximately 1626x372mm) Door margins - Top 127mm + Glass Central;
20G = 1440x150mm (less beading, the glass size is approximately 1412x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
- Bespoke Non-standard size Vision Panels can be made - poa;

Where Vision Panel size is mentioned, this is the actual cut-out size from the door;
The beading then covers the glass by 14mm (ie the glass size is 28mm smaller on each dimension - Height & Width.)
Margins are measured to the cut-out size from the door.


- Vision Panels glazed with Georgian Clear Fire-safety wired Glass GWPP - Select in the Drop-Down Menu -
- Clear Pyro Polished Plate Glass (no wire) C760 - Select in the Drop-Down Menu -
- Vision Panels glazed with Obscure or other Special Fire Glasses are possible - poa; 

- Glazing bead is Foil-wrapped Hardwood MDF or Solid Hardwood, and will protrude over the edges of the glass, and outside the thickness of the door; Solid Hardwood Timber Bead can be specified - poa;
- Intumescent fire/smoke seal is included for 3 edges - Top & both sides;
- Door Lippings are Real Hardwood or similar species, and may be concealed or exposed, and may only be on two long edges;
- Clear-Satin lacquered finish Door Faces are Real-veneer Hardwood, or similar species;
- Fire Door Casings - Fire Door Linings - Pair Fire Door Frames - Select in the Drop-Down Menu -

Durador FD60 Fire Doors are suitable for Inspected work in Schools, Hospitals, Office, Industry or at home, for inpection by the Building Inspector or Fire Officer. Durador FD60 fire doors have demonstrated a sound reduction value of up to 34RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E - see Premdor Durador Hardwood Veneered One-Hour 54mm Fire Door Specification : Premdor Durador Firemaster FD60 Spec. Sheet

Durador Fire Doors can be supplied to special sizes - cut to height or width and re-lipped;
They can manufactured to confi­gura­tion, eg Pair Fire-Doors in equal or unequal widths;
Pair Fire Doors can be made with square or rebated meeting-stiles - (Normal handing for rebated Fire Door Pairs is for the Left-Hand Door to open away first, but Right-Hand opening away first can be specified.);
They can also be manufactured with Bespoke Glass-Openings to your Firecheck specifi­cation, and glazed with various Safety-Wired or Clear-Pyro glazing options: PyroShield, PyroDur & PyroGuard.

The work is carried out in the Factory under the BWF Certifier Scheme, so that the final Durador Glazed FD60 Firedoor retains its certificate, to comply with the current Building Regulations. Every procedure and all materials are covered by the BWF Fire Door & Doorset Scheme; The Tamper Evident BWF label is fitted to all made to size Durador FD60 VP Firedoors; All details and specifi­cations are completely traceable and produced by BWF Certifire Manuf­ac­turers.

Durador FD60 Glazed Fire Doors need care from purchase, during fitting, and throughout their lifespan;
Guidelines for door fitting, and door care are laid out by the British Woodworking Federation:
BWF Door Care  
Premdoor Firemaster Durador VP doors have a copy of the manufacturers instructions included in the packaging.
Check in particular, any fitting tolerances, or wood-stains you wish to use, are within the manufacturer's recom­men­dations;


(Waxes, oils, varnishes or water-based woodstains are NOT suitable. Maximum size reduction on fitting is 3mm per stile for Premdor FD60 Glazed Durador Fire Doors; It is often possible to cut more off a door, but this is at your own risk, and may contravene the Fire Certificate.)

Follow Premdor door care and maintenance advice for treatment of your door, and to validate their guarantee;

We may be able to supply certified Premdor VP Glazed Durador Firemaster Doors with our Chain of Custody Certi­fica­tions - CoC :
JAS Timber CoC Certi­fica­tion - VP Durador FD60 Door TT-CoC-003944.­150 &­ VP Durador FD60 Door BMT-PEFC-1119.­150 
- POA;

- We cannot be held responsible for any variations in manufactured VP Durador FD60 Fire Door sizes, pattern, grading, moisture content, treatment, certi­fica­tion, knots, colour or grain.
- If any detail is important to you, then you need to check this before ordering, & notify us in writing on your order.

- Check all component dimensions, mouldings, and glazing are correct prior to any work on site;
- It is the purchaser's respon­sibility to check the suitability of this Fire Door & its certi­fica­tion, in conjunction with the intumescent strip. door frame with surround, hardware & the situation of use.
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot cancel or exchange any Durador VP Fire Door after order - Durador Glazed FD60 Doors are supplied as a Special Order.
- Once ordered, the Premdor component scheduling & manufacturing process will begin, and there can be no alteration or cancellation.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Dura-Door FD60 Firemaster Glazed-VP Fire Doors can be bought online - Select the Fire Door size you require and add to basket, then continue shopping if there are more Premdor® Glazed Fire Doors, or other items to order. ( The basket is at the Top-RHS of the page, in the Green Navigation-bar - very small! ) Fire Doors need to be ordered with a haulier delivery charge - Haulier Delivery - Please contact us - 01254 54000

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Flush Dura-Door FD60 Glazed VP Fire Doors (there is a 3% bank charge for credit cards)
3_Credit_Cards_logo

Direct Delivery of Premdor One Hour DuraDoor FD60 VP Firedoors
- poa

Alternative Delivery - Please contact us about these other methods below - 01254 54000

Van Delivery of DuraDor Glazed FD60 Fire Doors on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa ( from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat )

The approximate weights of Premdor Firemaster FD60 Glazed Dura-Door Flush Fire Doors are shown in Kg:
FD60DUR23 78x27 Flush Dura-Door Real-Veneer Fire Door - 26Kg;
FD6026 78x30 Flush . Real-Veneer Fire Door - 28Kg;
FD6029 78x33 Flush . Real-Veneer Fire Door - 30Kg;
FD6028 80x32 Flush . Real-Veneer Fire Door - 30Kg;
FD60726 2040x726x54mm Flush . Real-Veneer Fire Door - 28Kg;
FD60826 2040x826x54mm Flush . Real-Veneer Fire Door - 30Kg;
FD60926 2040x926x54mm Flush . Real-Veneer Fire Door - 32Kg;

Carrier Delivery of Premdor Veneer-Match VP Fire Doors is not possible.

Haulier Delivery of Durador-Match Firemaster One-Hour Glazed VP Fire Doors by Door Pallet is available from £68 to £140 +vat
Zone A mainland - poa other zones)

( Please tell us the post-code for your enquiry about Prefinished Durador Flush Veneer-Match 60 minute Glazed Vision Panel Fire Doors, so that we can quote for delivery )

- The September 2017 Premdor Price List is current - 01/09/2017
- Please phone us at JAS Timber for any further details about Premdor Flush Dura-Door Pre-Finished Veneer Fire Doors
- 01254 54000

E. & O.E. see
T&C - We do try to keep prices and specifi­cations of Premdor FD60 Dura-Door Fire Doors correct, but mistakes can be made! Please let us us know if you do spot any errors - thanks.