JAS Timber

Ash FD30 Glazed VP Fire Door - 44mm Internal Half-Hour Firecheck - Select VP & Options from Menu

Ash MtM Fire-Door 5VP Type10
  • Ash MtM Fire-Door 5VP Type10
  • ASH-7G-Fire-Door
  • Cherry Glazed FD30 Fire Door - DDA 16G VP
  • Ash Veneer 1G Glazed VP Fire-Door
  • Ash Veneer 3G Glazed VP Fire-Door
  • Ash FD30 MtM Fire Door - 1 Circular VP - Type 9
  • Beech FD30 Glazed VP 20G Fire Door
  • Maple Glazed FD30 Fire Door - 1G VP
Product code 3008P-PF.Ash-Veneer-Glazed.VP-FD30
  • £93.80
  • £112.56

Glazed to Order Ash Veneer FD30 VP Fire Door - Pre-finished Ash Real-Veneer Firedoor Facings;
- 44mm Internal Half-Hour Fire-Check with Fire-Glass Vision-Panels installed in Jeld-Wen or Millenium Ash Fire Doors.


Glazed to Order Ash Fire Doors need to be ordered with a Haulage Charge - JAS Delivery - Please contact us - 01254 54000
At present manuf­ac­turing time is not known - 01/05/2020 - Please plan ahead !
Glass Vision Panel BWF Certified Ash Fire Doors are glazed to your specifi­cation as a Special Order;

- Once ordered, the manuf­ac­turing process will begin, and there can be no alteration or cancel­lation.

- Ash is a natural material - variations in knots, colour and grain should be expected; They are not defects.
- We cannot match to any existing Ash Fire Doors because of this variation - Colours depicted are repre­sen­tative only.
- We can offer sequence-matched Ash Real-veneers for the best colour match - poa;

FD30 Glazed Ash Firedoors are suitable for Inspected work in Schools, Hospitals, Doctor's Surgeries, Shops, Pubs, Hotels, Offices, Industry or at home, for inspection by your Building Inspector or Fire Officer. Real-veneer Ash Fire Doors have a Clear-Satin Lacquer finish on both faces, and not the lippings. Ash FD30 Fire Doors have demonstrated a sound reduction value of up to 30RwdB, which can assist in meeting the requirements needed for Flat Entrance Systems against Approved Document E - see SPEC. tab above.

Ash Fire Doors can also be supplied without any vision panel - Flush Standard FD30 and FD60 Fire Doors
Real-veneers available are: Ash - Beech - Koto - Maple - Oak - Sapele - Walnut and unfinished Paint-Grade in Plywood, MDF and White Kraft-face - Glazed VP Fire Doors

Decorative real-veneered Made to Measure Fire Doors are available Pre-finished in Ash, Beech, Cherry, Koto, Maple, White Oak, Sapele and Walnut veneers; and unfinished Paint-Grade in Plywood, MDF and White Kraft-face - Solid Face or Glazed-VP MtM Fire Doors

How to Install an Internal Fire Door :

Ash Glazed FD30 VP Fire Door thickness is 44mm with 6mm Unfinished Concealed Lippings;
- Glazed Vision Panel sizes :
  1G = 450x450mm (less beading, the glass size is appro­ximately 422x422mm) Door margins - Top 127mm + Glass Central;
  2G = 700x450mm (less beading, the glass size is appro­ximately 672x422mm) Door margins - Top 127mm + Glass Central;
  3G = 700x150mm (less beading, the glass size is appro­ximately 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  5G = 2 x 700x150mm (less beading, the glass size is appro­ximately 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  7G = 914x150mm (less beading, the glass size is appro­ximately 886x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  8G = 914x508mm (762mm+ Doors; less beading, the glass size is appro­ximately 886x480mm) Door margins - Top 127mm + Glass Central;
  9G = 450mm diameter (less beading, the glass size is appro­ximately 422mm dia.) Door margins - Top 127mm + Glass Central;
10G = 5 x 245x245mm (less beading, the glass size is appro­ximately 217x217mm) Door margins - Top 127mm + Glass Central;
16G = DDA 775mmTOP 700mmBOTTOM x150mm (less beading, the glass size is appro­ximately 747 & 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
18G = 1150x150mm (less beading, the glass size is appro­ximately 1122x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
19G = 1654x508mm (762mm+ Doors; less beading, the glass size is appro­ximately 1626x480mm) Door margins - Top 127mm + Glass Central;
19G = 1654x400mm (610-686mm Doors; less beading, the glass size is appro­ximately 1626x372mm) Door margins - Top 127mm + Glass Central;
20G = 1440x150mm (less beading, the glass size is appro­ximately 1412x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass

Vision Panel sizes are the actual cut-out sizes form the Ash Fire Door;
The Beading then cover the glass by 14mm (ie the glass size is 28mm smaller on each dimension - Height & Width.)
Margins are measured to the cut-out size from the Fire Door edge.


- Bespoke Non-standard size Vision Panels can be made - poa;
- Vision Panels glazed with Obscure or other Special Fire Glasses are possible - poa;
- Vision Panels glazed with Georgian Clear Fire-safety wired Glass GWPP - Select in the Drop-Down Menu -
- Clear Pyro Polished Plate Glass (no wire) C730 - Select in the Drop-Down Menu -

- Glazing bead is Foil-wrapped Ash MDF for colour consistency, and will protrude over the edges of the glass, and outside the thickness of the door; Solid Ash Timber Bead can be specified - poa;
- Intumescent fire/smoke seal is included for 3 edges - Top & both sides;
- Unfinished Door Lippings are Real Ash or similar species, and may be concealed or exposed, and may only be on two long edges;
- Clear-Satin lacquered finish Door Faces are Real-veneer Ash, or similar species;
- Fire Door Casings - Fire Door Linings - Pair Fire Door Frames - Select in the Drop-Down Menu -

Ash FD30 fire doors have demonstrated a sound reduction value of up to 30RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E - see Premdor Ash Veneered Half-Hour 44mm Fire Door Specifi­cation : Premdor Ash Fireshield FD30 Spec. Sheet

Ash Glazed Fire Doors need care from purchase, during fitting, and throughout their lifespan;
Guidelines for door fitting, and door care are laid out by the British Woodworking Federation:
BWF Door Care
Premdoor Ash VP doors have a copy of the manuf­ac­turers instructions included in the packaging.
Check in particular, any fitting tolerances, or wood-stains you wish to use, are within the manuf­ac­turer's recom­men­dations;


(Waxes, oils, varnishes or water-based woodstains are NOT suitable. Maximum size reduction on fitting is 3mm per stile for Premdor FD30 Glazed Ash Fire Doors; It is often possible to cut more off a door, but this is at your own risk, and may contravene the Fire Certificate.)

Follow Premdor door care and maintenance advice for treatment of your door, and to validate their guarantee;

- Check all component dimensions, mouldings, and glazing are correct prior to any work on site;
- It is the purchaser's respon­sibility to check the suitability of this Fire Door & its certi­fica­tion, in conjunction with the intumescent strip, door frame with surround, hardware & the situation of use.
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot cancel or exchange any Ash FD30 VP Fire Door after order - Ash Glazed FD30 Fire Doors are supplied as a Special Order;
- Once ordered there can be no alteration or cancel­lation.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Ash FD30 VP Fire Doors can be bought online - Select the Fire Door size, Glazed VP size and any Intumescent Strip or Fire Casing that you require and add to basket; Then continue shopping if there are more Fire Doors, or other items to order. ( The basket is at the Top-RHS of the page, in the Green Navigation-bar - very small! ) Glazed Fire Doors need to be ordered with a haulier delivery charge - Haulier Delivery - Please contact us - 01254 54000

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Glazed Ash FD30 Fire Doors.
3_Credit_Cards_logo

Direct Delivery of Half Hour Glazed Ash FD30 Firedoors
- poa;

Alternative Delivery - Please contact us about these other methods below - 01254 54000

Van Delivery of Ash Glazed VP FD30 Fire Doors on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa ( from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat )

The approximate weights of Glazed FD30 VP Ash Flush Fire Doors are shown in Kg:
VPFD30ASH16 78x18 Flush Ash Glazed Real-Veneer Fire Door - 20Kg;
VPFD30ASH19 78x21 Flush Ash Glazed Real-Veneer Fire Door - 22Kg;
VPFD30ASH20 78x24 Flush Ash Glazed Real-Veneer Fire Door - 24Kg;
VPFD30ASH23 78x27 Flush Ash Glazed Real-Veneer Fire Door - 26Kg;
VPFD30ASH24 78x28 Flush Ash Glazed Real-Veneer Fire Door - 27Kg;
VPFD30ASH26 78x30 Flush Ash Glazed Real-Veneer Fire Door - 28Kg;
VPFD30ASH29 78x33 Flush Ash Glazed Real-Veneer Fire Door - 30Kg;
VPFD30ASH34 78x34 Flush Ash Glazed Real-Veneer Fire Door - 31Kg;
VPFD30ASH30 78x36 Flush Ash Glazed Real-Veneer Fire Door - 32Kg;
VPFD30ASH28 80x32 Flush Ash Glazed Real-Veneer Fire Door - 28Kg;
VPFD30ASH626 2040x626x44mm Flush Ash Glazed Real-Veneer Fire Door - 26Kg;
VPFD30ASH726 2040x726x44mm Flush Ash Glazed Real-Veneer Fire Door - 28Kg;
VPFD30ASH826 2040x826x44mm Flush Ash Glazed Real-Veneer Fire Door - 30Kg;
VPFD30ASH926 2040x926x44mm Flush Ash Glazed Real-Veneer Fire Door - 32Kg;

Carrier Delivery of Ash Glazed VP Fire Doors is not possible.

Haulier Delivery of Ash Veneered Glazed Fireshield Doors by Door Pallet is available from £68 to £140 +vat
Zone A mainland - poa other zones)

( Please tell us the post-code for your enquiry about Half-Hour Prefinished Ash Veneered Flush Glazed Fire Doors, so that we can quote for delivery )

- The January 2020 Veneer Fire Door Price List is current - 01/05/2020
- Please phone us at JAS Timber for any further details about Glazed Ash Pre-Finished Veneer Fire Doors
- 01254 54000

E. & O.E. see
T&C - We do try to keep prices and specifi­cations of Glazed FD30 Ash Fire Doors correct, but mistakes can be made! Please let us us know if you do spot any errors - thanks.