JAS Timber

Anegre Glazed VP Fire Door - 44mm Internal Premdor® FD30 with Vision Panel GtO

Anegre-1G-Glazed-Fire-Door
  • Anegre-1G-Glazed-Fire-Door
  • Anegre Fire Door
  • Anegre-3G-Glazed-Fire-Door
  • Anegre-7G-Glazed-Fire-Door
  • Anegre-8G-Glazed-Fire-Door
  • Anegre-10G-Glazed-Fire-Door
  • Anegre-16G-Glazed-Fire-Door
  • Anegre-18G-Glazed-Fire-Door
  • Anegre-19G-Glazed-Fire-Door
  • Anegre-20G-Glazed-Fire-Door
  • PAIR Type-12 Glazed MtM Sapele FD30 Fire Doors
Product code 3008P004-Anegre-FD30-VP-Fire-Door
  • £83.70
  • £100.44

Glazed to Order Anegre FD30 Glazed VP Fire Door - Pre-finished Anegre real-veneer door-facings -
- 44mm Internal (Half Hour) Fire-Check Glass Vision-Panels  installed in Premdor Fireshield Anegre Fire Doors


Anegre Fire Doors need to be ordered with a Delivery Charge - JAS Delivery - Please contact us -
At present manufacturing time is approximately 4 week on stock sizes - 01/­09/­2018 - Please plan ahead!
Glazed to Order, BWF Certified Anegre Fire Doors are glazed to your specification as a Special Order;
- Once ordered, the manufacturing process will begin, and there can be no alteration or cancellation.

POA - New Reg. Hardwood Fire Casings

Anegre, also spelt Anigre, is a straw-yellow­/brown coloured hardwood - similar to Teak or Afrormosia; Used as a veneer in Anegre FD30 Glazed VP Fire Doors..

- Anegre is a natural material - variations in knots, colour and grain should be expected; They are not defects.
- We cannot match to any existing Anegre Fire Doors because of this variation - Colours depicted are repre­sen­tative only. (Anegre is a particularly hard veneer to match to, and to sequence match.) 
- We can offer Sequence-matched Anegre Real-veneers for the best colour match - poa;

FD30 Glazed Anegre Firedoors are suitable for Inspected work in Schools, Hospitals, Doctor's Surgeries, Shops, Pubs, Hotels, Offices, Industry or at home, for inspection by your Building Inspector or Fire Officer. Real-veneer Anegre Fire Doors have a Clear-Satin Lacquer finish on both faces, and not the lippings. Anegre FD30 fire doors have demonstrated a sound reduction value of up to 30RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E - see Spec. tab above.

Premdor Ply Firedoors can also be supplied without any vision panel - Premdor Flush FD30 & FD60 Fire Doors
Other veneers are available: Anegre - Ash - Beech - Duradoor - Koto - Maple - Oak - Sapele - Walnut -
 Premdor Glazed VP Fire Doors

Decorative real-veneered Made to Size fire doors are available Pre-finished in Anegre, Ash, Beech, Cherry, Koto, Maple, White Oak, Sapele and Walnut veneers; and Unfinished in Plywood, MDF and White Kraft-face MtM Fire Doors - MtM Solid & Glazed VP Fire Doors

How to Install an Internal Premdor® Fire Door :

Anegre Fireshield FD30 Glazed VP Fire Door - Door thickness is 44mm with 6mm Unfinished Concealed Lippings (Popular Plywood Doors have exposed lippings.);
- Glazed Vision Panel sizes :
  1G = 450x450mm (less beading, the glass size is approximately 422x422mm) Door margins - Top 127mm + Glass Central;
  2G = 700x450mm (less beading, the glass size is approximately 672x422mm) Door margins - Top 127mm + Glass Central;
  3G = 700x150mm (less beading, the glass size is approximately 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  5G = 2 x 700x150mm (less beading, the glass size is approximately 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  7G = 914x150mm (less beading, the glass size is approximately 886x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
  8G = 914x508mm (762mm+ Doors; less beading, the glass size is approximately 886x480mm) Door margins - Top 127mm + Glass Central;
  9G = 450mm diameter (less beading, the glass size is approximately 422mm dia.) Door margins - Top 127mm + Glass Central;
10G = 5 x 245x245mm (less beading, the glass size is approximately 217x217mm) Door margins - Top 127mm + Glass Central;
16G = DDA 775mmTOP 700mmBOTTOM x150mm (less beading, the glass size is approximately 747 & 672x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
18G = 1150x150mm (less beading, the glass size is approximately 1122x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;
19G = 1654x508mm (762mm+ Doors; less beading, the glass size is approximately 1626x480mm) Door margins - Top 127mm + Glass Central;
19G = 1654x400mm (610-686mm Doors; less beading, the glass size is approximately 1626x372mm) Door margins - Top 127mm + Glass Central;
20G = 1440x150mm (less beading, the glass size is approximately 1412x122mm) Door margins - Top 127mm + Side 127mm + Offset Glass;

Where Vision Panel size is mentioned, this is the actual cut-out size from the Anegre Fire Door;
The beading then cover the glass by 14mm (ie the glass size is 28mm smaller on each dimension - Height & Width.)
Margins are measured to the cut-out size from the Fire Door edge.


- Bespoke Non-standard size Vision Panels can be made - poa;
- Vision Panels glazed with Obscure or other Special Fire Glasses are possible - poa; 
- Vision Panels glazed with Georgian Clear Fire-safety wired Glass GWPP - Select in the Drop-Down Menu -
- Clear Pyro Polished Plate Glass (no wire) C730 - Select in the Drop-Down Menu -

- Glazing bead is Foil-wrapped Anegre MDF for colour consistency, and will protrude over the edges of the glass, and outside the thickness of the door; Solid Anegre Timber Bead cna be specified - poa;
- Intumescent fire/smoke seal is included for 3 edges - Top & both sides;
- Unfinished Door Lippings are Real Anegre or similar species, and may be concealed or exposed, and may only be on two long edges;
- Clear-Satin lacquered finish Door Faces are Real-veneer Anegre, or similar species;
- Fire Door Casings - Fire Door Linings - Pair Fire Door Frames - Select in the Drop-Down Menu -

Anegre FD30 fire doors have demonstrated a sound reduction value of up to 30RwdB, which can assist in meeting the requirements needed for flat entrance systems against Approved Document E - see Premdor Anegre Veneered Half-Hour 44mm Fire Door Specification : Premdor Anegre Fireshield FD30 Spec. Sheet

Anegre Glazed Fire Doors need care from purchase, during fitting, and throughout their lifespan;
Guidelines for door fitting, and door care are laid out by the British Woodworking Federation:
BWF Door Care
Premdoor Anegre VP doors have a copy of the manufacturers instructions included in the packaging.
Check in particular, any fitting tolerances, or wood-stains you wish to use, are within the manufacturer's recom­men­dations;


(Waxes, oils, varnishes or water-based woodstains are NOT suitable. Maximum size reduction on fitting is 3mm per stile for Premdor Glazed Anegre FD30 Fire Doors - Not the top, where the Fire Certificate Stamp is placed; It is often possible to cut more off a door, but this is at your own risk, and may contravene the Fire Certificate.)

Follow Premdor door care and maintenance advice for treatment of your door, and to validate their guarantee;

- Check all component dimensions, mouldings, and glazing are correct prior to any work on site;
- It is the purchaser's respon­sibility to check the suitability of this Fire Door & its certi­fica­tion, in conjunction with the intumescent strip, door frame with surround, hardware & the situation of use.
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot cancel or exchange any Anegre Glazed FD30 Fire Door after order - Anegre VP Fire Doors are supplied as a Special Order;
- Once ordered, the manufacturing process will begin, and there can be no alteration or cancellation.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Anegre FD30 VP Fireshield Fire Doors can be bought online - Select the Fire Door size, Glazed VP size and any Intumescent Strip or Fire Casing that you require and add to basket; Then continue shopping if there are more Premdor® Fire Doors, or other items to order. ( The basket is at the Top-RHS of the page, in the Green Navigation-bar - very small! ) Glazed Fire Doors need to be ordered with a haulier delivery charge - Haulier Delivery - Please contact us - 01254 54000

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for Glazed Anegre FD30 Fire Doors
3_Credit_Cards_logo

Direct Delivery of Premdor Fireshield Half Hour Glazed Anegre FD30 Firedoors
- poa

Alternative Delivery - Please contact us about these other methods below - 01254 54000

Van Delivery of Anegre Glazed VP FD30 Fire Doors on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa ( from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat )

The approximate weights of Premdor Fireshield Glazed FD30 VP African Anegre Flush Fire Doors are shown in Kg:
VPFD30ANE23 78x27 Flush Anegre Glazed Real-Veneer Fire Door - 26Kg;
VPFD30ANE26 78x30 Flush Anegre Glazed Real-Veneer Fire Door - 28Kg;
VPFD30ANE29 78x33 Flush Anegre Glazed Real-Veneer Fire Door - 30Kg;
VPFD30ANE28 80x32 Flush Anegre Glazed Real-Veneer Fire Door - 28Kg;
VPFD30ANE626 2040x626x44mm Flush Anegre Glazed Real-Veneer Fire Door - 26Kg;
VPFD30ANE726 2040x726x44mm Flush Anegre Glazed Real-Veneer Fire Door - 28Kg;
VPFD30ANE826 2040x826x44mm Flush Anegre Glazed Real-Veneer Fire Door - 30Kg;
VPFD30ANE926 2040x926x44mm Flush Anegre Glazed Real-Veneer Fire Door - 32Kg;

Carrier Delivery of Premdor Glazed VP Fire Doors is not possible.

Haulier Delivery of Anegre Veneered Glazed Fireshield Doors by Door Pallet is available from £68 to £140 +vat
( Zone A mainland - poa other zones)

( Please tell us the post-code for your enquiry about Half-Hour Prefinished Anegre Veneered Flush Glazed Fire Doors, so that we can quote for delivery )

- The September 2017 Premdor Price List is current - 01/09/2017
- Please phone us at JAS Timber for any further details about Premdor Glazed Anegre Pre-Finished Veneer Fire Doors
- 01254 54000

E. & O.E. see
T&C - We do try to keep prices and specifi­cations of Premdor Glazed FD30 Anegre Fire Doors correct, but mistakes can be made! Please let us us know if you do spot any errors - thanks.