Self-Assembly Porch Canopies - Buy Online Now!KLAD Oak Stair Cladding is available from JAS Timber!JB Kind Special Offer Doors are available to buy online now!XL Joinery Special Offer Doors are available to buy online!Steelworx Door Handles are available to buy online now!Fingertip Design Door Handles available from JAS Timber!Buy the Pre-Assembled Sliding Pocket Door System from JAS Timber now!Steelworx Door Handles now available from JAS Timber...Buy Online Now!Get 10% OFF a Selection of Deanta Doors this August...Buy Now!JB Kind Doors on Special Offer until 31st August...Buy Now!
6x2 R/S Regularised Graded Building Timber (44x147mm ex 50x150mm) under 4.8M.
.jpg?v=5a0605af "Click image for larger view")
Building Materials - Rough Sawn Carcassing Timber 6 x 2" (150 x 50mm) - Profile
.jpg?v=185330ed){kind=small}
Description
6x2 R/S Regularised Timber (50x150mm Nominal) Graded - SSC16
Easi-edge Finished size: 5-7/8" x 1-3/4" (44x148mm)
- European Whitewood Easi-edge carcassing timber - up to 4.8 metres;
(3.0 - 3.6 - 4.2 - 4.8 Metres - Price per length in the drop-down menu box)
6x2 Sawn Timber 5.1 metres and longer is available cut to order, in a German Unsorted Whitewood;
In general we are now sourcing this timber as a very high quality German Whitewood Easi Edged Carcassing Timber - kiln-dried, regularised with eased corners, and graded to C16 or C24 specification. Normal lengths are 3.0, 3.6, 4.2 & 4.8 metres; We keep a good selection of larger sized timbers in stock, up to 9x2" / 47x225mm in the Easi-Edge, and 12x2" / 47x300mm in an Unsorted Whitewood Rough-Sawn Carcassing timber; Longer lengths - 5.4 & 6.0 metres are available in the Rough-Sawn timber - however, we can also source larger sizes and lengths to order.
Timber is a natural product - variations in colour, knots, grain and texture should be expected.
Other R/S BUILDING TIMBER can be viewed: GRADED BUILDING TIMBER
Easi-edge Finished size: 5-7/8" x 1-3/4" (44x148mm)
- European Whitewood Easi-edge carcassing timber - up to 4.8 metres;
(3.0 - 3.6 - 4.2 - 4.8 Metres - Price per length in the drop-down menu box)
6x2 Sawn Timber 5.1 metres and longer is available cut to order, in a German Unsorted Whitewood;
In general we are now sourcing this timber as a very high quality German Whitewood Easi Edged Carcassing Timber - kiln-dried, regularised with eased corners, and graded to C16 or C24 specification. Normal lengths are 3.0, 3.6, 4.2 & 4.8 metres; We keep a good selection of larger sized timbers in stock, up to 9x2" / 47x225mm in the Easi-Edge, and 12x2" / 47x300mm in an Unsorted Whitewood Rough-Sawn Carcassing timber; Longer lengths - 5.4 & 6.0 metres are available in the Rough-Sawn timber - however, we can also source larger sizes and lengths to order.
Timber is a natural product - variations in colour, knots, grain and texture should be expected.
Other R/S BUILDING TIMBER can be viewed: GRADED BUILDING TIMBER
Spec.
6x2 Whitewood Building Timber -
Sizes are the usual timber NOMINAL size that the 50x150mm Regularised building timber is machined from, with a finished size that is generally obtained; Planed 6x2 Whitewood sizes are generally ± 2mm on thickness / ± 3mm on width, ± 10mm cross-cutting tolerance & there may be one splitter saw cut-edge; (Be aware: For a multitude of reasons, size and profile of timber may vary from batch to batch, so it is best to purchase all you need for a job in one go, rather than buying more at a later date.)
- SIZES MEASURED AS AT - 15/08/2012 -
Most sizes of 50mm graded-carcassing timber are kiln-dried; Unseasoned 50mm timber can have a moisture content approaching the maximum saturation level of 27%, when air-dried "in-stick" this can fall to 20-23%, and if kiln-dried the moisture level is brought down to 18-20%. Generally in a heated building, the moisture level can be 8-10%, and it is here, when the moisture level of timber is rapidly changed, that twisting, warping and splitting can occur.
We keep tilt-fillet in stock and can cut firring pieces to size for roofing work.
POA : extra machining on BUILDING TIMBER - MACHINING IN YARD - MACHINING IN WORKSHOP - WORKSHOP TIME -
If any graded timber is cut, then this may affect the timber-joist grade rating, and may cut off the timber grade-stamp;
If Size, Pattern or Grading of the Timber Joist is important, then you need to check this with your Building Inspector, and tell us before ordering the timber, and before commencing work.
- We cannot be held responsible for any variations in machined timber sizes, pattern, grading, moisture content, treatment or certification.
- If it is important, then you need to check these or any other details before commencing work.
- Check all component dimensions, mouldings, glazing or any other details are correct prior to any work on site;
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot exchange any Timber Product once work has commenced; Direct Deliveries are a Special Order.
Sizes are the usual timber NOMINAL size that the 50x150mm Regularised building timber is machined from, with a finished size that is generally obtained; Planed 6x2 Whitewood sizes are generally ± 2mm on thickness / ± 3mm on width, ± 10mm cross-cutting tolerance & there may be one splitter saw cut-edge; (Be aware: For a multitude of reasons, size and profile of timber may vary from batch to batch, so it is best to purchase all you need for a job in one go, rather than buying more at a later date.)
- SIZES MEASURED AS AT - 15/08/2012 -
Most sizes of 50mm graded-carcassing timber are kiln-dried; Unseasoned 50mm timber can have a moisture content approaching the maximum saturation level of 27%, when air-dried "in-stick" this can fall to 20-23%, and if kiln-dried the moisture level is brought down to 18-20%. Generally in a heated building, the moisture level can be 8-10%, and it is here, when the moisture level of timber is rapidly changed, that twisting, warping and splitting can occur.
We keep tilt-fillet in stock and can cut firring pieces to size for roofing work.
POA : extra machining on BUILDING TIMBER - MACHINING IN YARD - MACHINING IN WORKSHOP - WORKSHOP TIME -
If any graded timber is cut, then this may affect the timber-joist grade rating, and may cut off the timber grade-stamp;
If Size, Pattern or Grading of the Timber Joist is important, then you need to check this with your Building Inspector, and tell us before ordering the timber, and before commencing work.
- We cannot be held responsible for any variations in machined timber sizes, pattern, grading, moisture content, treatment or certification.
- If it is important, then you need to check these or any other details before commencing work.
- Check all component dimensions, mouldings, glazing or any other details are correct prior to any work on site;
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot exchange any Timber Product once work has commenced; Direct Deliveries are a Special Order.
Delivery
We can now take Debit Card, BACS, Cash, Cheque or Credit Card payment online for 6x2 R/S Building Timber (there is a 3% bank charge for credit cards) -
DELIVERY of Rough Sawn Timber on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa; (from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;)
The approximate weight of 6x2 KD Timber is 3.2Kg per metre;
CARRIER DELIVERY of Sawn Timber is possible from £9.60 +vat - up to 10Kg/2.4M., then 50p per Kg; 2.4 to 3.0 M. - poa;
Anything longer is not suitable unless in pallet quantities; ( Zone A mainland - poa other zones)
(Please tell us the post-code for your enquiry so that we can quote for delivery.)
- The APRIL 2014 Scandinavian 25mm Redwood Timber Price List is current; - 19/06/2015 -
- Please phone us at JAS Timber Merchants for any details about 50x150mm Regularised Carcassing Timber - 01254 54000
E. & O.E. see T&C - We do try to keep prices and specifications correct, but mistakes can be made!
DELIVERY of Rough Sawn Timber on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa; (from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;)
The approximate weight of 6x2 KD Timber is 3.2Kg per metre;
CARRIER DELIVERY of Sawn Timber is possible from £9.60 +vat - up to 10Kg/2.4M., then 50p per Kg; 2.4 to 3.0 M. - poa;
Anything longer is not suitable unless in pallet quantities; ( Zone A mainland - poa other zones)
(Please tell us the post-code for your enquiry so that we can quote for delivery.)
- The APRIL 2014 Scandinavian 25mm Redwood Timber Price List is current; - 19/06/2015 -
- Please phone us at JAS Timber Merchants for any details about 50x150mm Regularised Carcassing Timber - 01254 54000
E. & O.E. see T&C - We do try to keep prices and specifications correct, but mistakes can be made!
Reviews
There are no reviews yet.
Add review
Page updated 1st Sep 2016, 12:13
