JAS Timber

4mm Plywood : American White Oak-1-Side A/B Grade (ex 2440x1220x3.­6mm )

Oak Panels
  • Oak Panels
  • Oak Panels
  • White Oak Plywood at JAS Timber
Product code 2106-4mm-Oak-Ply
  • £27.00
  • £32.40

4mmOak Plywood - American White Oak-1-side 2440x1220x3.­6mm

Real Veneer Crown-cut American White Oak or similar species;
Knots, Colour, Grain and specification can vary from board to board, even in the same pack.


American White Oak is slightly paler than European Oak;
Oak is a natural product - variations in knots, colour and grain should be expected - they are not defects.

See our other Plywood and MDF - Veneered Panels

Oak plywood is ideal for large areas of Real Oak Veneer board - It is easily cut to size, and it can be edged with Solid Oak timber moulding to give the appearance of a solid oak panel -
Oak Mouldings

Crown-Cut American White Oak Plywood - 4mm nominal size - 3.6mm finished thickness after sanding; ( Approx 1/8" Imperial size )

Oak Crown-Cut Veneer( also known as Plain-Cut Veneer or Flat-Cut Veneer ) :
Oak veneer cut across the centre of an Oak log produces veneer-leaves with the Crown Pattern in the centre, and some straight grain either side. As the Crown Cut moves through the log towards the centre of the log, the leaves become wider with the Crown being narrower and more well defined, with wider straight grain sections on either side.
Our Oak Plywood Sheets are all Crown-Cut Real Oak Veneer.

There are other types of cut, such as Quarter Cut Veneer - Rotary Cut Veneer - Length Cut Veneer - Half-Round Sliced Veneer - Rift Cut Veneer -

View Timber-Veneer Cutting Drawings at - Horizon Plywood

- 2440x1220x3.­6mm Metric size - is approximately 8x4x1/8" Imperial size - Oak Ply.
- American White Oak or similar species long-grain veneered ply;
- Crown-cut Real-Oak veneer;
- White Oak long-grain veneered ply has an A/B Grade Oak veneer Ply-face with balancing timber species on the reverse side;

This is an internal board - with MR (Moisture Resistant) glueline.
Oak Plywood is a fine-sanded, but unfinished board;

American White Oak is a paler timber than European Oak;
Oak is a natural product - variations in knots, colour and grain should be expected - they are not defects.

( Oak veneer 2-sides is now hard to source and is very expensive in comparison to 4mm Oak MDF veneered board. )
1/8" Oak Plywood 8x4 Sheet weight is approximately 8Kg;
( 13.5Kg is the chargeable carriage weight, to include packing, and some packaging material. )

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Timber is a natural product - variation in knots, colour and grain should be expected - They are not defects.
Colour and specifi­cations can vary from batch to batch, and even from one board to another in the same pack.

  • The PEFC logo® & PEFC® initials are registered Trademarks of the PEFC Council®;
  • The FSC logo® & FSC® initials are registered Trademarks of the Forest Stewardship Council®.

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for American White Oak Plywood.
3_Credit_Cards_logo

Van Delivery of Oak Plywood on our van, in Blackburn, Lancashire and the North-West, from £5 +vat, or £1 +vat per mile
-poa;  ( Manchester £30 +vat; Lancaster £40 +vat; Liverpool £45 +vat; Leeds £60 +vat; )

The chargeable carriage weight of 4mm White-Oak Plywood is 13.5Kg per board, to include our careful packing, and some packaging material;

Carrier Delivery of Oak Ply costs £11.40 +vat for up to 10Kg then 50p per Kg to Zone A mainland - poa other zones;
If sent by carrier it is better to cut the Oak Plywood Boards to a smaller size to avoid damage in transit;

For 1 or 2 sheets only, Oak Plywood must be cut for Transport -
- This can be 4x4 - 4x32" - 4x2 or 2x2 approximate sizes for packing; ( Less sawcuts ) Put the required size in the Special Instructions Box. -
3 sheets or more are strong enough to be sent by carrier as full size 8x4.

For special size cutting on Sheet Materials select Machining in Yard

For a better cut in the Workshop select Machining in Workshop - for more accuracy, and to reduce the spelching on the underside of the sheet;

Haulier Delivery of Oak Veneered Panels could be arranged for larger pallet quantities;

Direct Delivery of Oak Sheet Materials may be possible from some of our suppliers depending on quantity.

( Please tell us the post-code for your enquiry about Unfinished Oak Veneered Plywood Panels, so that we can quote for delivery. )

- The January 2018 Veneered Panel Price List is current - 01/11/2018
- Please phone us at JAS Timber with any further enquiries about all types of Oak Veneered Panels.
- 01254 54000

E. & O.E. see T&C - We do try to keep Prices and Specifi­cations of Oak Ply Boards correct, but mistakes can be made! Please let us us know if you do spot any errors - thanks.