JAS Timber

430mm Wide Internal Door Casing loose Set - Jointed Softwood Frame - Made to Size -

Wide Door Casing - with Tongue Joint
Product code 1701-430mm-Int-Casing-Set
  • £118.50
  • £142.20

430mm wide Softwood Internal Door Casing loose Set -
- Made to Size in our own Workshop - up to 430mm wide -

Machined from two pieces of 38x225mm Fifth Swedish Redwood - Tongue or Biscuit-Jointed to make up the width;
( 2 @ 2 Metre legs, 1 @ 0.9 Metre head un-trenched; The timber is un-treated and un-finished. )
This will not be grooved ( as per the image ) unless required, then choose from the drop-down menu - 38mm casings are not up to spec. as firecheck casings.
Finished section can be from 281mm to 430mm x 32mm finish - 37x12mm rebate size for 35mm doors, or 42x12mm rebate for 40mm doors.
- Enter the Frame size ( Usually the width of the wall, with any allowances for plaster etc. ) that you require in the [ Special Instructions ] box.
- Select the Door Frame Trenching option & enter your exact Door width in the [ Special Instructions ] box, if you want us to trench the casing head.

( This 430mm Jointed Door Casing can be cut to any narrower "lining" width, whilst the casing is being made, at no extra cost; Also see the narrower sizes that we do - links below. )
If you require an even wider door casing or door lining
- Please contact us - 01254 54000

Softwood is a natural product - variations in knots, colour and grain should be expected - They are not defects.

Other wide softwood door casings are - 280mm wide Internal Door Casing - 11 inch wide Internal Door Casing - 218mm lining width door casing - 9 inch wide Internal Door Casing and 169mm lining width door casing - 7 inch wide Internal Door Casing

Our Door Casing Range in Softwood, Hardwood and Oak -
Internal Door Casing and Door Linings

430mm Wide Planed Timber Internal Door Casing is usually machined from two pieces of 38mm Unassorted Joinery quality FSC® or PEFC® Scandinavian Redwood Timber - Finished size 32mm x 430mm

Machined from two pieces of 38x225mm Unsorted Swedish redwood softwood - Tongue or Biscuit-Jointed in our workshop to make up the width;
2 @ 82" legs, 1 @ 39" head: un-trenched and un-jointed; They are supplied as a loose set.
Finished section: 16-7/8" x 1-1/4" - rebated: 1-1/2" x 1/2" - ( 430x32mm - rebated 38x12mm ).
Untreated & un-primed Redwood Softwood Timber.
If you require an even wider door casing or door lining - Please contact us - 01254 54000

17 inch Planed Timber Internal Casing should be treated, decorated and fixed in place as soon as possible to help minimise any movement/­twisting and surface checking/­splitting that occurs naturally with changes in moisture content; We do look at cupping before manuf­ac­turing this door-casing, and we don't use any with a "cup" of more than 2mm, which can be pulled back with standard fixings. If you were wanting to use this for something more complicated than a standard "flat-frame" door-casing, then an engineered board may be more suitable. We have no control of conditions after the the timber has left our yard, so purchase with this in mind please, at your own risk.

17x1-1/2" Planed Softwood Internal Casing can not be recommended for use externally without suitable timber treatment & weather-proof coating; External use of Moulded Redwood Internal Door Casing is at your own risk - Timber life expectancy is increased with good timber treatment and protective finishing coats. It is better to use pressure treated timbers externally - poa;

- Sizes last measured at - 04/06/2016 -

Sizes may be the usual timber nominal size that the 38x450mm Planed Internal Casing is machined from, with a finished size that is generally obtained;
Planed 17 inch Redwood Internal Casing sizes are generally ±1mm on thickness / ±2mm on width, ±6mm cross-cutting tolerance & there may be one splitter saw cut-edge; This is the size immediately after machining the timber, and cannot take into account any movement later, caused by moisture movement into, or out of the Timber Door Casing. ( Be aware: For many reasons, size and profile of timber may vary from batch to batch, so it is best to purchase all you need for a job in one go, rather than buying more at a later date. )

- We cannot be held responsible for any variations in machined nominal 18 x 1-1/2" PSE Casing sizes, pattern, construc­tion, grading, moisture-content, treatment, certi­fica­tion, knots, colour or grain.
- If it is important, then you need to check these or any other details before purchasing, & notify us in writing on your order.

We are able to supply Certi­fica­tion for 18x1-1/2" Moulded Softwood Internal Casing with our Chain of Custody Certi­ficates, CoC -
JAS Timber FSC CoC Certi­fica­tion - 430mm Internal Casing TT-CoC-003944.150 and PEFC 430mm Internal Casing BMT-PEFC-1119.150 - poa;


- Check your Door Casing Delivery, to see that all your 430mm Internal Casing's component dimensions, any mouldings, any glazing, and that ALL other details are correct, prior to any related work on site;
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot exchange any Timber Door Casing once work has started on it. 17" Door Casings are machined to order, and are supplied as a Special Order.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use

Payment - We can take Debit Card, BACS, Cash, Cheque or Credit Card payment online for 430mm Internal Door Casings.
3_Credit_Cards_logo
Van Delivery of 430mm Wide Door Casings on our van, in Blackburn, Lancashire and the North-West, from £5 +vat, or £1 +vat per mile
- poa  ( from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat; )

The chargeable carriage weight of Wide Internal Door Casing sets can be up to 48Kg, to include minimal packing, our careful packaging, and the Standard XDP Zone-A Carriage Charge.
430mm Internal Door Casings can be purchased online - Just add to basket, which calculates carriage by weight;

Carrier Delivery of 450mm Wide Door Casings is possible from £11.40 +vat - up to 10Kg/2.4M., then 50p per Kg to Zone A mainland - poa other zones;
Anything longer than 3M. is not suitable unless in pallet quantities that can be sent by haulier - some items can be delivered direct from our supplier;

Haulier Delivery of 430mm Door Framing by pallet can be arranged for larger quantities - poa;

( Please tell us the post-code for your enquiry about 15" / 18" Wide Timber Door Linings, so that we can quote for delivery. )

- The October 2018 Scandinavian 38mm Redwood Board Price List is current - 01/10/2018

- Please phone us at JAS Timber for any further details on Timber Door Casings - 01254 54000

E. & O.E. see
T&C - We do try to keep prices and specifi­cations of Wide Timber Door Casings correct, but mistakes can be made! Please let us us know if you do spot any errors - thanks.