25mm Plywood : Streply Hardwood Faced 2440x1220x25mm ( 8x4x1" )
Details
25mm Plywood: Hardwood Faced Plywood
- 2440x1220x24mm ( Approximately 8x4x7/8" ) - Probably 23.5mm as a sanded thickness;
- Chinese Hardwood long-grain veneered ply - B/BB Grade, or similar;
This ply is more stable and generally will swell, twist or warp less than a softwood core plywood.
- 2019 - Colour at present is the standard reddish-pink of Red Mahogany Hardwood,
There are .. plys - one thicker central ply & and two thinner outer plys.
- 25mm Plywood origin, specifications and grading may change from batch to batch;
Buyers should satisfy themselves as to the suitability of a particular plywood for their application, prior to purchase.
Specification is complex for Plywoods - see Spec. tab above.
This board is not guaranteed by the manufacturer or our supplier for permanent outdoor use -
25mm Plywood must be cut for carrier delivery;
(This can be 4x4 - 4x32" - 4x2 or 2x2 sizes for packing - Less sawcuts);
Put your packing sizes in the Special Instructions Box before adding to basket.
For special size cutting on Sheet Materials select Machining in Yard
For a better cut in the Workshop select Machining in Workshop - for more accuracy, & to reduce the spelching on the underside of the sheet;
25mm Plywood full sheets 2440X1220mm can be ordered online; (Please contact us regarding delivery costs)
Add to basket, then please Continue Shopping <--- & Add (...) of the delivery item to basket: JAS Delivery
- Timber is a natural product - variations in knots, colour and grain should be expected; They are not defects.
It is possible to get other sheet sizes - eg 10x4, 10x5; (3050x1220mm & 3050x1525mm) - Usually in thicker sizes
Other thicknesses of Hardwood Plywood - WBP Hardwood Plywood - All Sheet Materials - Panel Products
Spec.
25mm Chinese Plywood - General Description :
The plywood surface veneers are of Okoume or similar red hardwood; the plywood core veneers are a species of poplar.
The board is normally manufactured with an odd number of plies, each ply being oriented at 90 degrees to the adjacent one, to create a balanced construction. The plywood face and reverse veneers run in the direction of the length of the sheet : long-grain plywood.
Thickness tolerances of plywood - differences are allowed from the nominal thickness of the board after sanding.
In the case of 25mm plywood, this is from 23.85mm to 25.2mm, as a mean thickness.
Length and width dimensions of the plywood are stated within +/- 1mm tolerance.
Adhesives used in the plywood manufacture are Phenol (WBP type) for the core veneers, and Melamine Formaldehyde (Type 1 Exterior) for the face veneers.
Plywood face grading is stated as B/BB
- a B plywood face is described as a neatly cut veneer, substantially defect free and sanded smooth;
- a BB plywood face allows minor defects, so long as they are filled and sanded.
These plywood face-grade descriptions are summarised from BS6566 - (which although not a current standard, has been adopted as a description by several Plywood Mills.)
Long-grain hardwood veneered plywood - many boards have a decorative veneer but would have to be selected if required for this use;
Weight per 8x4 x 1" plywood board is approximately 45Kg;
Moisture content of the plywood is approximately 10%;
Plywood Strength Data - non declared, NOT CE marked for structural use.
Applications - Furniture, Shopfitting, Exhibition Stands and general construction work. This board has an external glueline WBP (Water & Boil-Proof); WBP bonded plywood generally has a high resistance to humid and wet environments, although the forces of expansion in a saturated timber veneer may cause the veneer to actually split, while the glueline itself is sound. This does not indicate that the plywood has been manufactured incorrectly - timber is a natural material subject to swelling when it absorbs moisture. Be aware that Poplar does not posses a high resistance to fungal decay in humid conditions. For long service in these conditions, design considerations and the appropriate weather-proof finish of the plywood are of the highest importance. The timber (especially end-grain) would need to be coated and maintained to a BS-CP external specification for any external use. These plywood boards have not been CE grade tested for structural uses such as floor decking, roof decking or wall sheathing - (although they are of comparable quality to ones that are CE marked.) We would be able to supply a CE marked plywood, but this would be at a higher price.
This ply is more stable and generally will swell, twist or warp less than a softwood sheathing plywood.
- 25mm Plywood origin, specifications and grading may change from batch to batch;
- Buyers should satisfy themselves as to the suitability of a particular plywood for their application, prior to purchase.
- We cannot be held responsible for any variations in machined 25mm WBP 8x4 Plywood sizes, pattern, grading, moisture content, treatment, certification, knots, colour or grain.
- If it is important, then you need to check these or any other details before commencing work & notify us in writing on your order.
We are able to supply FSC or PEFC Certified 25mm Plywood 8x4 Panel with our Chain of Custody Certifications - CoC :
JAS Timber CoC Certification - 25mm Ply 8x4 INT-PEFC/COC-001119.150 or 25mm Ply INT-COC-003944.150 - POA;
- Check all component dimensions, mouldings, glazing or any other details are correct prior to any work on site;
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot exchange any Timber Plywood once work has commenced; 25mm 8x4 Plywood orders, & Direct Deliveries are supplied as a Special Order.
Reviews (0)
There are no reviews yet.
Payment & Delivery
Payment - We can now take Debit Card, BACS, Cash, Cheque or Credit Card payment online for 1" WBP Plywood
JAS Delivery of 25mm WBP Plywood Sheets on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa (from £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;)
The approximate weight of 2440mm x 1220mm x 25mm Hardwood Plywood is 53Kg per sheet, to include packing;
Carrier Delivery of 25mm Plywood is possible from £11.40 +vat - up to 10Kg/2.4M., then 50p per Kg; 2.4 to 3.0 M. + £15+vat!
Anything longer is not suitable unless in pallet quantities; ( Zone A mainland - poa other zones)
Direct Delivery of 25mm Plywood Sheets may be possible from some of our suppliers.
(Please tell us the post-code for your enquiry about 1 inch Hardwood Ply, so that we can quote for delivery.)
- Please phone us at JAS Timber with any enquiries about 25mm WBP Plywood - 01254 54000
E. & O.E. see T&C - We do try to keep prices and specifications of 1" Ply correct, but mistakes can be made!