JAS Timber

12mm Plywood : Hardwood Faced 2440x1220mm ( 8x4x1/2" )

12mm + 18mm WBP Hardwood Plywood Sheet
Product code 2101-12mm-WBP-Ply
  • £37.00
  • £44.40

12mm Plywood :  Hardwood Faced Plywood
- 2440x1220x12mm ( Approximately 8x4x1/2" ) - Probably 11mm as a sanded thickness;
- Chinese Hardwood long-grain veneered ply - B/BB Grade, or similar;
This ply is more stable and generally will swell, twist or warp less than a softwood core plywood.

- 01/10/2018 - Colour at present is the standard reddish-pink of Red Mahogany Hardwood, although it can vary to a cream or brown;
There are .. plys - one thicker central ply & and two thinner outer plys.

- 12mm Plywood origin, specifications and grading may change from batch to batch;
Buyers should satisfy themselves as to the suitability of a particular plywood for their application, prior to purchase.
Specification is complex for Plywoods - see Spec. tab above.

This board is not guaranteed by the manufacturer or our supplier for permanent outdoor use - WBP refers to the glueline;
We are unable to give a guarantee with imported plywood boards -
 See Meyer Timber Specification

12mm  Plywood must be cut for carrier delivery;
(This can be 4x4 - 4x32" - 4x2 or 2x2 sizes for packing - Less Sawcuts);
Put your packing sizes in the Special Instructions Box before adding to basket.

For special size cutting on Sheet Materials select Machining in Yard

For a better cut in the Workshop select Machining in Workshop - for more accuracy, & to reduce the spelching on the underside of the sheet;

12mm  Plywood full sheets 2440X1220mm can be ordered online; (Please contact us regarding delivery cost) 
Add to basket, then please
 Continue Shopping <--- & Add (...) of the delivery item to basket: JAS Delivery

- Timber is a natural product - variations in knots, colour and grain should be expected; They are not defects.

It is possible to get other sheet sizes - eg 10x4, 10x5; (3050x1220mm & 3050x1525mm) - Usually in thicker sizes

Other thicknesses of Hardwood Plywood - WBP Hardwood Plywood - All Sheet Materials - Panel Products

12mm WBP Chinese Plywood 2440x1220mm - 8'x4' Panel - General Description :
Economy-Grade Imported Hardwood Ply

The plywood surface veneers are of Okoume or similar red hardwood; the plywood core veneers are a species of poplar.
The board is normally manufactured with an odd number of plies, each ply being oriented at 90 degrees to the adjacent one, to create a balanced construction. The plywood face and reverse veneers run in the direction of the length of the sheet : long-grain plywood.

Thickness tolerances of plywood - differences are allowed from the nominal thickness of the board after sanding.
In the case of 12mm plywood, this is from 11.2mm to 12.3mm, as a mean thickness.
Length and width dimensions of the plywood are stated within +/- 1mm tolerance from the mean dimensions, to allow for the sanding process.

Adhesives used in the plywood manufacture are Phenol (WBP type) for the core veneers, and Melamine Formaldehyde (Type 1 Exterior) for the face veneers.

Plywood face grading is stated as B/BB but it isn't unknown for it to turn up as a "C" marking;
- a B plywood face is described as a neatly cut veneer, substantially defect free and sanded smooth;
- a BB plywood face allows minor defects, so long as they are filled and sanded.
- C plywood face would be larger defects, filled and sanded with possible "missed" fillings.
These plywood face-grade descriptions are summarised from BS6566 - (which although not a current standard, has been adopted as a description by several Plywood Mills.)
Long-grain hardwood veneered plywood - many boards have a decorative veneer but would have to be selected if required for this use;

Weight per 8x4 x 1/2" plywood board is approximately 19Kg;

Moisture content of the plywood is approximately 10%;

Plywood Strength Data - non declared, not CE marked for structural use.

Applications - Furniture, Shopfitting, Exhibition Stands and general construction work. This board has an external glueline WBP (Water & Boil-Proof); WBP bonded plywood generally has a high resistance to humid and wet environments, although the forces of expansion in a saturated timber veneer may cause the veneer to actually split, while the glueline itself is sound - This does not indicate that the plywood has been manufactured incorrectly - timber is a natural material subject to swelling when it absorbs moisture. Be aware that Poplar does not posses a high resistance to fungal decay in humid conditions. For long service in these conditions, design considerations and the appropriate weather-proof finish of the plywood are of the highest importance. The timber (especially end-grain) would need to be coated and maintained to a BS-CP external specification for any external use. These plywood boards have not been CE grade tested for structural uses such as floor decking, roof decking or wall sheathing - (although they are of comparable quality to ones that are CE marked.) We would be able to supply a CE marked plywood, but this would be at a higher price.

This ply is more stable and generally will swell, twist or warp less than a softwood core plywood.

- 12mm Plywood origin, specifications and grading may change from batch to batch;
Buyers should satisfy themselves as to the suitability of a particular plywood for their application, prior to purchase.

- We cannot be held responsible for any variations in machined 12mm WBP 8x4 Plywood sizes, pattern, grading, moisture content, treatment, certification, knots, colour or grain.
- If it is important, then you need to check these or any other details before commencing work & notify us in writing on your order.

We are able to supply FSC or PEFC Certified 12mm Plywood 8x4 Panel with our Chain of Custody Certifications - CoC :
JAS Timber CoC Certification - 12mm Ply 8x4 INT-PEFC­/COC-001119.150 or 12mm Ply INT-COC-003944.150 - POA;

- Check all component dimensions, mouldings, glazing or any other details are correct prior to any work on site;
- JAS Timber cannot be held liable for the consequences of any variation;
- We cannot exchange any Timber Plywood once work has commenced; 12mm 8x4 Plywood orders, & Direct Deliveries are supplied as a Special Order.

There are no reviews yet.

Write a review

    Overall satisfaction
    Value for money
    Ease of use

Payment - We can now take Debit Card, BACS, Cash, Cheque or Credit Card payment online for 8x4 1/2" Plywood
JAS Delivery of 1/2" Ply Panel Products on our van, in Blackburn, Lancashire & the North-West, from £5 +vat, or £1 +vat per mile - poa (from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;)

The approximate weight of a 2040x1220x12mm WBP Hardwood Plywood Sheet is 30Kg, to include packing;

Carrier Delivery of 12mm Ply Sheet Materials is possible from £12.40 +vat - up to 10Kg/2.4M., then 50p per Kg; 2.4 to 3.0 M. + £15+vat!
Anything longer is not suitable unless in pallet quantities;
( Zone A mainland - poa other zones)

Haulier Delivery of 12mm Ply Boards could be arranged for larger pallet quantities;
Direct Delivery of 12mm Plywood may be possible from some of our suppliers.

(Please tell us the post-code for your enquiry about 8x4 Half-inch WBP Plywood, so that we can quote for delivery.)

- The April 2021 Imported Far Eastern Hardwood Plywood Price List is current - 30­/03/2021 -
- Please phone us at JAS Sheet Materials with any enquiries about 2440x1220x12mm WBP Plywood Panel - 01254 54000

E. & O.E. see T&C - We do try to keep prices and specifications correct for 1/2 inch 8x4 Plywood Board, but mistakes can be made!