Securit SOLAR Polished Chrome Lever Door HandlesSecurit LUNAR Satin Nickel Lever Door HandlesSecurit ULTRA Dual-finish Lever Door HandlesSecurit VENUS Dual-finish Lever Door HandlesSecurit CLASSIC Dual-finish Lever Door HandlesSecurit DIMPLE Dual-finish Lever Door HandlesPESARO Clear Glazed Oak Internal Door - XL Joinery DoorsPESARO Flush-routered Oak Internal Door - XL Joinery DoorsSAVONA Clear Glazed Oak Internal Door - XL Joinery DoorsSAVONA Oak Internal Door - XL Joinery Doors
Softwood 2" (47mm) - Regularised 'Eased Edge' and Fine Sawn Carcassing Timber:
Smaller sizes of this timber are a high quality Home-grown whitewood, most now being regularised Easi-edge - (semi-planed with eased corners), kiln-dried and graded to SSC16 (or occasionally SSC24) certification; They are generally Grade-Stamped for inspection by your Building Inspector, so suitable as joists, rafters and building timber. Some sizes are standard rough-sawn timber.
Normal lengths are 3.0, 3.6, 4.2 & 4.8 metres, and 5.4 & 6.0 metres in some sizes, and in the larger purlin & roof-hip sizes;
We keep a good selection of larger sized timbers in stock, up to 9" / 225mm in the Easi-Edge and 12" / 300mm in a German unsorted graded Whitewood Fine-Sawn Carcassing timber; We can also source larger sizes and lengths to order.
Most sizes of 50mm graded-carcassing timber are kiln-dried; Unseasoned 50mm timber can have a moisture content approaching the maximum saturation level of 27%, when air-dried "in-stick" this can fall to 20-23%, and if kiln-dried the moisture level is brought down to 18-20%. Generally in a heated building, the moisture level can be 8-10%, and it is here, when the moisture level of timber is rapidly changed, that twisting, warping and splitting can occur.
We keep tilt-fillet in stock and can cut firring pieces to size for roofing work.
Whitewood Carcassing Timber is a natural product - variations in knots, colour, and grain should be expected - they are not defects.
A certain amount of checking and splitting is allowable in the Grading Specification, but each piece is Grade-Stamped for your reassurance.
Sizes are the usual timber nominal size that the Buildng Timber is machined from, with a finished size that is generally obtained;
(Be aware: For a multitude of reasons, size and profile of timber may vary from batch to batch, so it is best to purchase all you need for a job in one go, rather than buying more at a later date.
If any graded timber is cut, then this may affect the timber-joist grade rating, and may cut off the timber grade-stamp;
If Size, Pattern or Grading of the Timber Joist is important, then you need to check this with your Building Inspector, and tell us before ordering the timber,
and before commencing work. We cannot be held responsible for any variations in Carcassing Timber sizes, pattern or grading.)
Price is generally per running metre or per length - we can price larger quantities and pack lots per cubic metre.
We are able to supply Certified Timber with our Chain of Custody Certifications - poa;
JAS Timber COC Certification - SA-COC-003209.& SA-PEFC/COC-003209 ;
POA : quantity discounts, cut lengths or extra machining on BUILDING TIMBER - MACHINING IN YARD - MACHINING IN WORKSHOP - WORKSHOP TIME -
We can now take Debit Card, BACS, Cash, Cheque or Credit Card payment online for 50mm Carcassing Timber (there is a 3% bank charge for credit cards) -
DELIVERY of 2" Rough Sawn Timber on our van, in Blackburn, Lancashire & the North-West, from £5.00 +vat, or £1.00 +vat per mile - poa; (from: £30 Manchester, £35 Lancaster, £45 Liverpool, £60 Leeds, all +vat;)
Approximate weights for 50mm Timber Sections are shown in Kg per metre;
CARRIER DELIVERY of 2" Timber Joists is possible from £9.60 +vat - up to 10Kg/2.4M., then 50p per Kg;
2.4 to 3.0 M. + £15+vat! Anything longer is not suitable unless in pallet quantities; ( Zone A mainland - poa other zones)
HAULIER DELIVERY of 2" Sawn Timber by pallet can be arranged for larger quantities.
DIRECT DELIVERY of 50mm Timber Joists may be possible from some of our suppliers.
(Please tell us the post-code for your enquiry about 50mm Sawn Building Timber, so that we can quote for delivery.)
- Please phone us at JAS Timber Merchants for any details about 2" Carcassing Timber & Sawn Wood Products - 01254 54000
E. & O.E. see T&C - We do try to keep prices and specifications of 2" Sawn Timber correct, but mistakes can be made!
Web Design Lancashire by Brickweb