ROLL & STROLL Hard Surface Floor ProtectorAtlantic Door HandlesStormguard Door SillsAtlantic Status Door HandlesAtlantic Senza Pari Door HandlesAtlantic Mediterranean Door HandlesAtlantic Old English Door HandlesOak Cladding : Reed & Bead and VT&G BoardsJB Kind Special Offer DoorsArtis Real Wood Kitchen Worktops
DENSO® 225mm Flashing Tape: 9" Flashband Roll - High quality, self adhesive flashing tape, for general repairs and sealing. 9" Builders flashband is a lead coloured, crease resistant flashing tape with a smooth grey covering, with a high grade bitumen backing. Looks like lead, but easier to apply; Interleaved for easy handling. 9" Denso Flashband Tape has an aluminium foil laminate embedded within the bitumen layers to give greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints, in service, without the loss of adhesion or splitting.
225mm Denso Flashing Tape is a robust Domestic & Commercial Building Product that will last for many years, so you can confidently use this flashing to make new or repair old flashings & soakers in brickwork, and use wider Flashband for valley gutters.
9" FLASHBAND TAPE may be used to flash over Felted, Mastic-asphalt and other Bituminous roofs; Asbestos-cement, Concrete, Stone-flag or Slate roofs; Aluminum sheet, Epoxy-coated sheet and Galvanized sheet roofs;
225mm FLASHBAND TAPE can be used to flash to Parapet walls, Chimney stacks, Window-kerbs, Upstands & can be used for soakers and joints between brickwork and timber studding prior to tile or slate hanging.
9" FLASHBAND TAPE can flash round projections through roofs (cold pipes, roof lights, extractor vents), and as a protective wrapping of insulation covered pipes and tanks.
225mm FLASHBAND TAPE may be used to repair lead flashings, felt roofs, cracked roof tiles or slates, cement fibre corrugated sheets, and asbestos cement sheets (sealing in any asbestos fibre!).
9" FLASHBAND TAPE seals glazing bars and roof lights in greenhouses, conservatories, and roof-lights.
Breaking Strength 4.5 N/mm
Elongation @ break 100%
Adhesion Strength 4.5 N/mm width (ASTM D1000)
Adheres to: Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics;
Temperature Range for Application 5°C to 40°C & for Service 80°C (maximum short term)
Roll Length - 10 metres minimum
Thickness 1.0mm Weight 1.0 kg/m² average
Recommended Primer - Denso Flashing Tape Primer;
Technical Data Sheets for 9" Flashband Tape are on the Denso website - DENSO FLASHING TAPE
This product contains petroleum products which may affect the skin; for full application instructions see "Instructions for Use" worksheet. www.denso.net
There are no reviews yet.